The Gilt Edge Seamless Flooring System for Luxury Vinyl Tiles (LVT) is a fully integrated system for the installation of LVT floor coverings over a prepared concrete substrate. Incorporated is a substrate moisture control system, substrate levelling correction systems, and high performance adhesives, combined to provide fully warrantied contract commercial installations.
Substrate moisture control — Using Protect Crete Moisture-Fix/Densi-Proof deeply penetrates new or existing concrete to cure, densify and water proofs; controls excess moisture in new/green concrete with high relative humidity (>95% RH) and allows floor-coverings to be installed soon after application
High Performance substrate priming system that is water-based, VOC compliant and solvent free
High Performance VOC Compliant substrate correction — self levelling compounds that provide rapid, high quality surface finishes, with high MPA ratings
Dependable industry leading flooring adhesive technology that is fully compliant with the latest emissions and sustainability requirements
Gilt Edge Seamless Flooring Systems are applicable to all residential and commercial Luxury Vinyl Tile flooring installations on a concrete substrate
Not all products may be necessary depending on the condition of the base substrate
Please refer to Gilt Edge Industries Ltd technical representative for detailed guidance on applicable adhesive types
Limitations on Use
This system is not intended for use:
On substrates without an industry standard below slab damp-proof membrane
In situations where the below slab damp-proof membrane has been compromised
On substrates with relative humidity greater than 75%
Situations exposed to hydro-static pressure
Base substrates are to be of sound form/condition free of any structural delamination
Not recommended for areas subject to very high point loading e.g. loaded pallet trolleys/hoists
Substrate repair compounds are designed for use below floor-coverings and not intended for long periods of uncovered exposure.
Gilt Edge Industries Ltd have been a key supplier to the New Zealand flooring industry for nearly 50 years.
Gilt Edge Seamless Flooring Systems are developed and distributed by Gilt Edge Industries Ltd nationwide, and have been specified into construction projects throughout New Zealand over the past 10 years.
Other Performance Attributes
A service warranty applies covering total system installations when installed as per all manufacturer technical data sheets, technical guidelines, and specifications.
All Seamless System Components comply with The Green Star NZ V3 Technical manual, requiring that VOC emissions can be demonstrated through the provision of test results showing compliance to a recognised Ecolabel or a recognised Indoor Air Quality Scheme.