Part of the San Selmo Corso Range, Brenta Raw is a Pale bleached bone white, with the unique Corso Terra special surface and texture. Must use a flush joint.
Elegant and elongated, the San Selmo Corso range of kiln-fired clay bricks puts a bespoke stamp on contemporary architectural projects. Made to order in Italy, the sleek new format shape is twice the standard brick length, with a custom aesthetic that elevates any residential or commercial environment.
500 x 40 x 100mm
Cost effective and low maintenance — no painting, sealing, or treating required. Colour is fired in and will not fade
Insulating — combine bricks with energy efficient design to keep warm in winter, and cool in summer
Durable — long lasting, fully reusable (not just recyclable), and naturally resistant to fire or pests
Sustainable — made from naturally abundant sources of clay, and free from contaminants
Brick Veneer Cladding is suitable for buildings within the following scope:
For residential and light commercial type buildings
The scope limitations of NZBC Acceptable Solution E2/AS1 Paragraph 1.1 in terms of floor area, with a maximum of two stories
With a maximum height of brick veneer of 7.5 m above the supporting foundation, except that at gable ends and some piers this height may be up to 10.0 m, and a maximum height of 4.0 m above a roof line or 7.5 m above an adjacent building foundation, whichever is the lesser
With a depth of cavity of between 40 mm and 75 mmWith a risk score of 0-20, calculated in accordance with NZBC Acceptable Solution E2/AS1 Table 2
Situated in NZS 3604 Wind Zones up to and including 'Extra High'
Limitations on Use
For use with aluminium window and door joinery that is installed with vertical jambs and horizontal heads and sills
Statement of Building Code Compliance
This product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code: