Muros imitation Wooden Sleepers are constructed from a durable fibreglass-base, to authentically recreate the look and feel of an old railway wooden sleeper texture without the weight or expense. The European panels are suitable for walls and ceilings, counters and columns. Designed for interior use, and exterior applications in residential and inspired workspace, hospitality and retail settings. Joints are made to look seamless with installation materials provided so the wood veneer panels look to 'wrap around' corners and angles.
The artisan-made Muros Wooden Sleepers offer a rustic, barn-like cosiness — with deep aged wood grain, knots and weathered imperfections. In a variety of colours, they are suitable for any purpose, from feature walls to fences and cellars. Stains range from warm Walnut, Bone, Cocoa tones to Black, White and Ash.
Available in a horizontal and vertical format, the panel can be installed as a landscape or turned 90 degrees into a portrait design. Note the vertical style does not 'run on' and therefore requires 'detailing' tube installed between panels.
Constructed from a fibreglass compound, combined with natural mineral pigments, panels are available in a range of colours, and also easily painted. Plaster, sign writing and other creative finishes offer further versatility and distinction.
Horizontal: 3,270 x 1,330mm (w x h)
Vertical: 1,330 x 3,270mm (w x h)
Total area: 4.35m²
Please note: Panel dimensions can vary slightly between handmade batches
Lightweight, flexible, and cost effective
Strong and durable — impact, water, erosion, UV and thermal resistant
Space saving with low relief
Straight-forward installation, and maintenance free
Available in both vertical and horizontal formats
Available in six colours (walnut, bone, white, ash, black, cocoa) and can be painted
Interior and exterior walls and ceilings, columns and counters
Group 3 fire rating (Group 1 available on request)
Panels are used for a wide range of building applications, primarily: walls, ceilings, columns, counters, bulkheads, and external facades
Suitable for interior application. Exterior use requires specific installation advice and materials
Ideally installed over a solid substrate such as ply or MDF to accommodate mechanical fixing.
Existing plasterboard/GIB can also be used with fixing focused on the wall framing behind — see Installation Instructions for full information
Limitations on Use
Muros Wall Panels provide a strong and durable decorative finish — they are not cladding
Exterior use is subject to specific installation advice — contact Muros
Muros Wall Panels are fire resistant (Group 3 and Group 1 available), however to maintain a quality appearance panels should not be subjected to strong, direct, or constant heat
Exposure to weather elements, and coastal locations with salt may impact the finish quality over time — contact Muros for full information
Acoustic features are not inherent in the wall panels
Not designed as an insulating product
Not recommended for use in showers
Statement of Building Code Compliance
When used in accordance with the instructions and information from Muros, Muros Wall Panels will meet the following requirements of the New Zealand Building Code (NZBC):
B1.3.1, B1.3.2 and B1.3.3 (a) and (j): Muros Wall Panels meet the requirements for loads arising from self-weight and typical soft body impacts normally expected in areas where the product will be used
B2.3.1 (c): Muros Wall Panels meet the durability requirements of the NZBC and have a serviceable life of at least 5 years
Muros Wall Panels have been tested to Australasian fire rating standards: ISO 5660 (NZ) and AS/NZS 3837 (Australia).
Muros Wall Panels have a Group 3 Number Classification rating as tested and reported by BRANZ
Group 1 available on request
Muros Wall Panels have been successfully installed and used internationally for over 25 years. Muros' solid reputation over the past decade in the Australasia Pacific region, has been built on end-to-end personalised customer service, reliability of supply, quality of product, fulfilment of orders, and after-sales support.
Other Performance Attributes
The design and manufacturing processes for Muros Wall Panels are ISO certified:
All Muros Wall Panels, when installed according to supplier instructions carry: