Muros Strata Stone panels are constructed from a durable fibreglass-base, to authentically recreate the look and feel of a heavily textured 'stacked' stone wall without the weight or expense. The European panels are suitable for walls and ceilings, counters and columns. Designed for interior use, and exterior applications in residential and inspired workspace, hospitality and retail settings. Joints are made to look seamless with installation materials provided so the stone veneer panels look to 'wrap around' corners and angles.
A striking design which proves appealing for those seeking a modern twist to traditional stone cladding. With a tight array of irregular-shaped rectangular stone slates, it adds a contemporary feeling to any room yet retains the classic stone-look inspired by those typical in Galicia, Northern Spain.
Muros Strata Stone is a popular option in the Muros Stone veneer range and available in the warmer tones — Grey, Earth, Anthracite and Ochre — and also in pure Black and White colours. Versatile in a range of commercial applications, it also has strong demand in the residential sector — in particular for fireplace surrounds and garden/outdoor fencing and walls — as a time and cost saving alternative to real masonry stone.
Constructed from a fibreglass compound, combined with natural mineral pigments, panels are available in a range of colours, and also easily painted. Plaster, sign writing and other creative finishes offer further versatility and distinction.
Horizontal: 3,270 x 1,310mm (w x h)
Total area: 4.28m²
Please note: Panel dimensions can vary slightly between handmade batches
Lightweight, flexible, and cost effective
Strong and durable — impact, water, erosion, UV and thermal resistant
Straight-forward installation, and maintenance free
Available in horizontal format
Available in six colours: grey, earth, black, white, anthracite, and ochre
Interior and exterior walls and ceilings, columns and counters
Group 3 fire rating (Group 1 available on request)
Panels are used for a wide range of building applications, primarily: walls, ceilings, columns, counters, bulkheads, and external facades
Suitable for interior application. Exterior use requires specific installation advice and materials
Ideally installed over a solid substrate such as ply or MDF to accommodate mechanical fixing.
Existing plasterboard/GIB can also be used with fixing focused on the wall framing behind — see Installation Instructions for full information
Limitations on Use
Muros Wall Panels provide a strong and durable decorative finish — they are not cladding
Exterior use is subject to specific installation advice — contact Muros
Muros Wall Panels are fire resistant (Group 3 and Group 1 available), however to maintain a quality appearance panels should not be subjected to strong, direct, or constant heat
Exposure to weather elements, and coastal locations with salt may impact the finish quality over time — contact Muros for full information
Acoustic features are not inherent in the wall panels
Not designed as an insulating product
Not recommended for use in showers
Statement of Building Code Compliance
When used in accordance with the instructions and information from Muros, Muros Wall Panels will meet the following requirements of the New Zealand Building Code (NZBC):
B1.3.1, B1.3.2 and B1.3.3 (a) and (j): Muros Wall Panels meet the requirements for loads arising from self-weight and typical soft body impacts normally expected in areas where the product will be used
B2.3.1 (c): Muros Wall Panels meet the durability requirements of the NZBC and have a serviceable life of at least 5 years
Muros Wall Panels have been tested to Australasian fire rating standards: ISO 5660 (NZ) and AS/NZS 3837 (Australia).
Muros Wall Panels have a Group 3 Number Classification rating as tested and reported by BRANZ
Group 1 available on request
Muros Wall Panels have been successfully installed and used internationally for over 25 years. Muros' solid reputation over the past decade in the Australasia Pacific region, has been built on end-to-end personalised customer service, reliability of supply, quality of product, fulfilment of orders, and after-sales support.
Other Performance Attributes
The design and manufacturing processes for Muros Wall Panels are ISO certified:
All Muros Wall Panels, when installed according to supplier instructions carry: