You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

Seamless Flooring Systems: Subfloor Preparation and Installation of Sheet Vinyl on Concrete
Description

The Gilt Edge Seamless Flooring System is a fully integrated installation system for under sheet vinyl flooring on a prepared concrete substrate. It incorporates a substrate moisture control system, substrate correction system, and high performance adhesives that, as a complete system, provide a whole of life high-performance flooring system.

Key Features
  • Substrate moisture control — Using Protect Crete Moisture Fix/Densi-Proof, allows floor-coverings to be installed over a new/green substrate with a higher than normal relative humidity (RH%)
  • High Performance substrate priming system that is water-based, VOC-compliant and solvent-free
  • High Performance, VOC-compliant substrate correction — self levelling compounds that provide a high level of finished surface with high MPA ratings
  • Dependable industry leading flooring adhesive technology that is fully compliant with the latest emissions and sustainability requirements
Homestar / Green Star (Envirospec) Compliant
Homestar / Green Star
Scope of Use
  • Gilt Edge Seamless Flooring Systems are applicable to all residential and commercial vinyl flooring installations
  • Not all products may be necessary depending on the condition of the base substrate
  • Please refer to a Gilt Edge industries Ltd technical representative for detailed guidance on applicable adhesive types
Limitations on Use
  • This system is not intended for use:
    • On substrates without an industry standard below slab damp-proof membrane.
    • In situations where the below slab damp-proof membrane has been compromised
    • On substrates with relative humidity greater than 90%
    • In situations exposed to hydro-static pressure
  • Base substrates are to be of sound form/condition free of any structural delamination
  • Not recommended for areas subject to very high point loading e.g. loaded pallet trolleys/hoists
  • Substrate repair compounds are designed for use below floor-coverings and not intended for long periods of uncovered exposure
In-Service History

Gilt Edge Industries Ltd have been a key supplier to the New Zealand flooring industry for nearly 50 years.

Gilt Edge Seamless Flooring Systems are developed and distributed by Gilt Edge Industries Ltd nationwide, and have been specified into construction projects throughout New Zealand over the past 10 years.

Other Performance Attributes

Warranty

A service warranty applies covering total system installations when installed as per all manufacturer technical data sheets, technical guidelines, and specifications.

Green Star

All Seamless System Components comply with The Green Star NZ V3 Technical manual, requiring that VOC emissions can be demonstrated through the provision of test results showing compliance to a recognised Ecolabel or a recognised Indoor Air Quality Scheme.

Documents
Specification Clause (Masterspec)
Data Sheet: Densi-Proof
Data Sheet: Giltgrip 88
Data Sheet: Moisture-Fix
Data Sheet: Uzin KE2000S
Data Sheet: Uzin NC160
Data Sheet: Uzin NC170
Data Sheet: Uzin NC888
Data Sheet: Uzin PE280
Data Sheet: Uzin PE520
Gilt Edge on Masterspec
Installation Example

Gilt Edge Architectural partner with Architects and Specifiers nationally, to deliver trusted technical advice, and Seamless Flooring Systems Masterspec PartnerNet Specification writing assistance.

Product Enquiries

News from Gilt Edge

Specifying Technically Sound E3 Building Integrity into Subfloor Preparation and Flooring Installation Systems
Gilt Edge Concrete Treatment Minimises Moisture for Hospital Wet Room Install
Subfloor Contamination and Antimicrobial Protection
Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.