• Bare timber doors, windows, trim and furniture

• Clear top coat required for adequate durability and protection (either Cabot's Cabothane Clear or Danish Oil)
• Topcoat needs to be oil-based
• Do not apply product if temperature is below 10°C or is likely to fall below 10°C during the drying period
• *All timings quoted at 25 degrees and 50% humidity
• Only apply to new timber or to timber from which all previous finishes have been removed
• Moisture content of timber should be close to equilibrium moisture content, usually 10-15%, but not exceeding 15%, for satisfactory staining

Maintenance:

Regular inspection of all coated surfaces is recommended. Once water repellency has diminished, re-apply the existing topcoat as per label instructions. If the timber needs re-staining, sand back to bare.