You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

Rust Brick — Basics
Description

An honest colour through brick. Quite simply this is a rust coloured brick, suitable for volume builds, commercial and residential projects. Best used with a raked or rolled joint. Part of the Basics range, distributed by The Brickery.

  • 230 x 76 x 70mm

With volume projects and cost effectiveness in mind, the Basics range is a comprehensive range developed to meet the current economic climate, supporting our builders, developers and bricklayers, to continue designing and building with clay bricks. The colour palette consists of a brown colour-through base with a contemporary wash of pigment over the face, mix and match, changing the aesthetic with mortar colour of choice.

Variations in colour, texture and size are natural characteristics of clay products and production variations can occur from batch to batch. Whilst every effort is made to provide samples, brochures and displays consistent with product delivered to site, they should be viewed as a guide only.

Key Features
  • Cost effective and low maintenance — no painting, sealing, or treating required. Colour is fired in and will not fade
  • Insulating — combine bricks with energy efficient design to keep warm in winter, and cool in summer
  • Durable — long lasting, fully reusable (not just recyclable), and naturally resistant to fire or pests
  • Sustainable — made from naturally abundant sources of clay, and free from contaminants
Recyclable Content (Post-Consumer)
Post-Consumer Recyclable Content
Scope of Use

Brick Veneer Cladding is suitable for buildings within the following scope:

  • For residential and light commercial type buildings
  • The scope limitations of NZBC Acceptable Solution E2/AS1 Paragraph 1.1 in terms of floor area, with a maximum of two stories
  • With a maximum height of brick veneer of 7.5m above the supporting foundation, except that at gable ends and some piers this height may be up to 10.0m, and a maximum height of 4.0m above a roof line or 7.5m above an adjacent building foundation, whichever is the lesser
  • With a depth of cavity of between 40 and 75mm
  • With a risk score of 0-20, calculated in accordance with NZBC Acceptable Solution E2/AS1 Table 2
  • Situated in NZS 3604 Wind Zones up to and including 'Extra High'
Limitations on Use
  • For use with aluminium window and door joinery that is installed with vertical jambs and horizontal heads and sills
Statement of Building Code Compliance

This product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:

  • Clause B1 Structure: Performance B1.3.1, B1.3.2, B1.3.3, B1.3.4
  • Clause B2 Durability: Performance B2.3.1(b), B2.3.1(c), B2.3.2
  • Clause E2 External moisture: Performance E2.3.2
  • Clause F2 Hazardous building materials: Performance F2.3.1
Documents
CAD/PDF
Data Sheet
Brick & Block Layers Federation: Best Practice Guides
Brochure: The Brickery

2020

The Brickery is the next chapter in the Austral Bricks and Monier Bricks joint venture, and is proud to present a design driven collection of clay bricks sourced from around the world.

Product Enquiries

News from The Brickery

The Brickery Offers 100-Year Warranty for Austral and Monier Bricks
Brick Façade Creates Stunning First Impression for Red House
Reclaimed Brick Enhances Modern Country Home
Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.