You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

Standard Range Concrete Fastener — PC-DC1
Description

PC-DC1 is an adjustable clip to enable the efficient mounting of panels into drywall or concrete substrates. The adjustable PC-DC1 female anchor houses the PC-F1A and features a self-tapping installation for drywall and the option to hammer-set into pre-drilled hole in concrete or brick. Allows transverse adjustment on uneven substrates to create a level-mounting surface.

Once PC-F1A is installed into the PC-DC1, the set can be used with any male clip in the Standard Range. Made from white acetal copolymer.

Key Features
  • Quick to install
  • No framework required when mounting to concrete walls
  • Adjustable gap between wall and panel (4.5mm-10.5mm) depending on PC-F1A adjustment
  • Minimal standoff of 4.5mm between wall and panel
  • Transverse adjustment allows ability to level wall quickly
  • Allows flexibility of use of 6 male options depending on panel weight and size (2kg-15kg pull out load)
  • Remove and refit panels in any sequence time after time
NZ Made
NZ Made
NZ-Owned Business
NZ-Owned Business
Scope of Use

Standard clip for mounting wall panels onto concrete or drywall

  • Remove and refit panels in any sequence time after time
  • Allows transverse adjustment on uneven substrates to create a level-mounting surface
  • 6 male options depending on panel weight and size (2kg-15kg pull out load)
  • Adjustable gap between wall and panel (4.5mm-10.5mm) depending on PC-F1A adjustment

Applications:

  • Stone, concrete, brick walls
  • Drywall/plasterboard
  • Interior refurbishment of existing block walls
  • Applying acoustic panels to block walls
  • Applying various panel types to concrete or drywall

Compatibility:

  • Once PC-F1A is installed into the PC-DC1, the set can be used with any male clip in the Standard Range
  • Can be used with PC-M1B, PC-VM1, PC-SM2, PC-M2H, PC-VMX, PC-SM2H, PC-SM1AC
  • Substrates: concrete, block, brick, and drywall/plasterboard
Limitations on Use
  • See Installation Guide for full information
  • Refer to Clip Layout Guide TD-09 for clip spacing recommendations
  • Refer to Clip Selection Guide for suggested panel + substrate
In-Service History

Fastmount Panel Mounting Systems were developed for the high performance demands of the superyacht industry, and have been used in thousands of commercial and residential building projects in New Zealand and around the world since 2004.

Other Performance Attributes
  • Pull-out loads independently tested by SGS New Zealand
  • Fastmount has a two year limited warranty on all products
Documents
Installation Guide: PC-DC1 Concrete

07/18

Installation Guide: PC-DC1 Drywall

07/18

Product Sheet: PC-DC1

07/18

Test Certificate: PC-DC1

INZ64255-01 2018

Maintenance Document
Warranty Information
Clip Layout Guide: TD-02

06/19

Clip Layout Guide: TD-09

05/19

Product Catalogue Technical Guide

09/20

Fastmount Clip Selection Guides

Architectural & Marine

Fastmount design and manufacture hidden panel mounting systems for interior panels, allowing architects and installers to re-think the panelling process.

Product Enquiries

News from Fastmount

Very Low Profile Range Used for Living Room Fitout
Video: How Fastmount's Very Low Profile Panel Fastener Works
Fastmount Seeks to Standardise Framework and Panel Mounting with New System NEW
Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.