You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

AcraTex Exsulite EIFS Cladding System
Description

Dulux AcraTex Exsulite External Insulating and Finishing systems (EIFS) Cladding system.

Dulux AcraTex Exsulite EIFS Cladding System is a three coat plaster system incorporating embedded alkali reinforced fibreglass mesh and selected finishing coats. The main plaster component is Dulux AcraTex RenderWall P400 render, which provides a tough, durable and crack resistant base coat when used in conjunction with the alkali reinforcing mesh.

Substrate

Plastering system for application on Polystyrene sheets (EPS and XPS) which have been installed over an approved drained and ventilated cavity, and comprising cement based polymer modified plasters, alkali resistant fibreglass mesh and assorted uPVC flashings and trims.

Texture and Coating

This system can be finished with a Dulux AcraTex cement based texture or any pre-coloured texture from the Dulux AcraTex range. These trowel or sprayed textures can then be applied over the entire sheet and finished to desired profile.

Key Features

The Exsulite EIFS Cladding System integrates four key components:

  • Continuous weatherproof air barrier & moisture management system
  • Efficient high 'R' rated insulation value
  • A weatherproof building envelope
  • Latest colours & finishes providing a sustainable walling system for modern designs
Categories / Ranges
Plaster Render Systems
Scope of Use

The Exsulite Thermal Façade System by Dulux AcraTex is a cavity system for new residential and light commercial construction. It can also be used as a façade remedial system for rectification and rejuvenation projects when used as a direct fix system.

Statement of Building Code Compliance

The Dulux AcraTex Exsulite EIFS Cladding System when installed, applied and maintained in accordance with the written instructions, recommended installation details and maintenance instructions from Dulux AcraTex will meet or contribute to meeting the relevant provisions of the New Zealand Building Code, in accordance with Codemark Certificate 40069:

  • Structure: B1.3.1, B1.3.2 and B1.3.4.
  • Durability: B2.3.1 (b).
  • Protection from Fire: C3.4 (a) Walls, C3.5 Spread of Fire, C3.6 (buildings within one meter of a shared boundary).
  • External Moisture: E2.3.2, E2.3.3, E2.3.5, (as applicable to concrete wall systems).
  • Hazardous Building Materials: F2.3.1. 
B1 Structure compliant
Structure
B2 Durability compliant
Durability
C Protection from Fire compliant
Protection from Fire
E2 External Moisture compliant
External Moisture
F2 Hazardous Building Materials compliant
Hazardous Building Materials
CodeMark
CodeMark
Documents
AcraTex Renderwall Float Finish Datasheet
AcraTex AcraShield Advance Low Gloss Datasheet
SDS - AcraShield Advance (Matt)
AcraTex Renderwall P400 Datasheet
Material Safety Data Sheet
AcraTex HAR Primer 501/8 Datasheet
AcraShield Advance Matt Datasheet
SDS - AcraShield Advance (Low Gloss)
CodeMark Certificate
Maintenance Instructions
Warranty
Specification Clause (Masterspec)
Brochure
Colour Range
Installation Details
AcraTex Exsulite EIFS Installation manual
Acratex Exsulite Kooltherm Installation Manual

A durable exterior acrylic texture system from Dulux suitable for all masonry substrates, concrete and lightweight cladding.

Product Enquiries

News from Dulux AcraTex

Dulux AcraTex Cladding System Solutions
Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.