You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

Standard Clip — Self-tapping Male Heavy Duty — PC-M2H (Black)

The heavy duty self tapping clip, PC-M2H adds to the Standard Range. Specifically designed for thicker panels with increased loading requirements, where PC-M1B is not strong enough, with a 10kg pull out load per clip set. Compatible with all female clips in the Standard Range, and installs into panels with a minimum 8mm thickness.

Key Features
  • Self-aligning installation without adhesives
  • Perfect panel alignment secure mounting every time
  • Remove and refit panels in any sequence 100+ times
  • Saves time and reduces cost 
  • 10kg pull out load per clip
  • Allows for flexing and expansion of panel and support frame materials
Scope of Use
  • Covered or painted panels with minimum 8mm thickness
  • Ceiling and wall panels
  • Exterior deckhead panels(marine only)
  • Refits and upgrades of existing installation
  • Variety of substrates
Limitations on Use
  • See Installation Guide for full information
  • Refer to Clip Layout Guides for clip spacing recommendations
  • Refer to Clip Selection Guide for suggested panel + substrate applications
  • Fastmount Panel Mounting Systems are not recommended for exterior panels
In-Service History

Fastmount Panel Mounting Systems were developed for the high performance demands of the superyacht industry, and have been used in thousands of commercial and residential building projects in New Zealand and around the world since 2004.

Other Performance Attributes
  • Remove and refit panels in any sequence 100+ times
  • 10kg pull out load per clip
  • Pull-out loads independently tested by SGS New Zealand
  • Fastmount has a two year limited warranty on all products
Clip Panel Matrix: PC/LP/VL/MC/SL
Panel Offset Guide: PC/LP/VL/MC
PC-M2H Product Sheet
Clip Layout Guide: TD-02


Clip Layout Guide: TD-09


Clip Layout Guide: TD-12


Installation Guide: PC-F1A


PC-RF1 Installation Guide

Fastmount design and manufacture hidden panel mounting systems for interior panels, allowing architects and installers to re-think the panelling process.

Product Enquiries

News from Fastmount

What's the Best Method for Installing Curved Wall Panels?
FlexiHouse by Fastmount: Revolutionising Interior Design with Modular Panel Solutions
Geometric Floor to Ceiling Timber Panel Wall Achieved with Fastmount
Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.