You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

Profix TS45

Profix TS45 Concealed fixed flat panel façade system is a unique aluminium vertical rail system specifically designed for use with Trespa Meteon vertical panels. TS45 offers a greater design scope due to its 45mm cavity that can be increased up to 450mm when fixed in conjunction with special stand-off brackets. This allows flexibility when designing for either new buildings or over cladding existing façades and means TS45 can offer an economical solution for straightening existing structures.

Profix TS45 is ideally suited to multi-level applications with complex design requirements, such as parapets, and can be specifically designed to achieve a rail spanning capability of up to 1.2m.

Profix TS45 is tested to and or compliant with the requirements of AS/NZS 4284 and sections B1, B2 & E2 of the NZBC.

  • Available in 4 master sheet sizes
  • Available in 8 and 10mm thickness
  • Available in a large range of colours and finishes
Key Features
  • Profix TS45 provides greater ventilation over multiple levels increasing the stability of the façade For use with 8mm or 10mm Trespa Meteon panels
  • Profix TS45 rail system is durable, lightweight and fixed vertically over continuous framing
  • Trespa panels and Profix fixing systems offer minimal maintenance and exceptional through life performance can be expected
  • Profix TS45 rails have a spanning capacity between horizontal support structure of up to 1.2m with specific design reducing the need for vertical framing
  • Profix TS45 system can be used in conjunction with special standoff brackets fixed to either timber or metal framing to increase the cavity width up to 450mm This can create an economical solution to straightening existing structures or add design flexibility and features to the cladding facade
  • The Sika Tack adhesive system offers concealed fixing giving a clean, flat and straighter finish to the façade
  • Exposed mechanical fixings such as rivets or wafer head stainless steel screws, colour matched to the panel, can be used as an alternative to adhesive fixing
  • Suitable for use as a cladding solution on new buildings and facade upgrades
  • Supply and installation carried out by approved installers only
Scope of Use
  • Suitable for use as a multi-level residential or commercial cladding façade
  • Fixed over a Rigid Air Barrier compliant with Table 23 of E2/AS1: August 201 and 3604: 2011
  • Approved for use in wind zones up to 2.5 kPa ULS wind pressure or 64.5 m/s Note: For use in wind zones exceeding 2.5kPa wind pressure the system and fixings must be specified as site specific by the system suppliers
  • Suitable for use in all environments including sea spray zones when powder coated
  • Suitable for use with 8.0mm or 10mm Trespa Meteon installed vertically in panel sizes up to 2.5m x 1.2m Note: Panel sizes exceeding those above must be specified as site specific by the system supplier
  • Profix TS45 vertical rails have a spanning capability subject to in use conditions where framing set out does not allow direct fixing
Limitations on Use
  • Supply and installation carried out by approved installers only
  • Panel sizes exceeding those above must be specified as site specific by the system supplier
Statement of Building Code Compliance

Trespa Meteon panels in conjunction with Profix TS45 Cladding system meet the requirements of NZBC sections B1 Structure, B2 Durability and E2 External Moisture. 

In-Service History

Trespa Meteon panels have been used extensively in Europe for over 50 years and in New Zealand for over 10

Other Performance Attributes

Trespa Meteon panels are:

  • Colourfast
  • Extremely durable
  • High impact resistance
  • Low maintenance
  • Graffiti resistant
Data Sheet
Specification Clause/Guide
Environmental Information
FSC Certificate
ISO 14001 Certificate
ISO 9001 Certificate
PEFC Certificate

Décortech Exteriors: Elevating Exteriors through Innovative Cladding Systems

Product Enquiries

News from Décortech Exteriors

MondoClad: Non-Combustible Prefinished 3.0mm Solid Aluminium Panel NEW
Trespa Meteon Cladding Brings a Splash of Colour and Fun to Hillmorton High School
From High-End Homes to Vibrant Education Buildings with Trespa Meteon
Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.