Muros Slimline Brick Panels are constructed from a durable fibreglass-base, to authentically recreate the look and feel of a 'modern brick' finish without the weight or expense. The European panels are suitable for walls and ceilings, counters and columns. Designed for interior use, and exterior applications in residential and inspired workspace, hospitality and retail settings. Joints are made to look seamless with installation materials provided so the brick veneer panels look to 'wrap around' corners and angles.
Muros Slimline Brick ceiling and wall panels provide a striking alternative to the traditional brick with cleaner lines. Modern yet authentic, they are the perfect addition to a contemporary setting or cosy cellar. Long thin bricks that come in White, Red, Terracotta, and a Natural look offer a wide range to choose from.
Muros brick veneer panels are over 4m² in size, making them perfectly-suited to completing large wall spaces quickly and efficiently. The hand-made brick panel boasts a natural aged appearance, containing subtle imperfections and colour variations. Far from a cookie cutter design, the bricks are detailed with nicks, chips, cracks and elements of natural wear and ageing found in established brick walls, albeit this is of a more urban take.
Constructed from a fibreglass compound, combined with natural mineral pigments, panels are available in a range of colours, and also easily painted. Plaster, sign writing and other creative finishes offer further versatility and distinction.
Horizontal: 3,280 x 1,310mm (w x h)
Total area: 4.30m²
Individual bricks (approximately):
Width range: 310mm
Mortar width/height range: 8mm - 25mm
Please note: Panel dimensions can vary slightly between handmade batches
Lightweight, flexible, and cost effective
Strong and durable — impact, water, erosion, UV and thermal resistant
Space saving with low relief
Straight-forward installation, and maintenance free
Available in horizontal format
Available in four colours (white, red, terracotta, natural) and can also be painted
Interior and exterior walls and ceilings, columns and counters
Group 3 fire rating (Group 1 available on request)
Panels are used for a wide range of building applications, primarily: walls, ceilings, columns, counters, bulkheads, and external facades
Suitable for interior application. Exterior use requires specific installation advice and materials
Ideally installed over a solid substrate such as ply or MDF to accommodate mechanical fixing
Existing plasterboard/GIB can also be used with fixing focused on the wall framing behind — see Installation Instructions for full information
Limitations on Use
Muros Wall Panels provide a strong and durable decorative finish — they are not cladding
Exterior use is subject to specific installation advice — contact Muros
Muros Wall Panels are fire resistant (Group 3 and Group 1 available), however to maintain a quality appearance panels should not be subjected to strong, direct, or constant heat
Exposure to weather elements, and coastal locations with salt may impact the finish quality over time — contact Muros for full information
Acoustic features are not inherent in the wall panels
Not designed as an insulating product
Not recommended for use in showers
Statement of Building Code Compliance
When used in accordance with the instructions and information from Muros, Muros Wall Panels will meet the following requirements of the New Zealand Building Code (NZBC):
B1.3.1, B1.3.2 and B1.3.3 (a) and (j): Muros Wall Panels meet the requirements for loads arising from self-weight and typical soft body impacts normally expected in areas where the product will be used
B2.3.1 (c): Muros Wall Panels meet the durability requirements of the NZBC and have a serviceable life of at least 5 years
Muros Wall Panels have been tested to Australasian fire rating standards: ISO 5660 (NZ) and AS/NZS 3837 (Australia).
Muros Wall Panels have a Group 3 Number Classification rating as tested and reported by BRANZ
Group 1 available on request
Muros Wall Panels have been successfully installed and used internationally for over 25 years. Muros' solid reputation over the past decade in the Australasia Pacific region, has been built on end-to-end personalised customer service, reliability of supply, quality of product, fulfilment of orders, and after-sales support.
Other Performance Attributes
The design and manufacturing processes for Muros Wall Panels are ISO certified:
All Muros Wall Panels, when installed according to supplier instructions carry: