The 200 Super Roof leads the way with outstanding spanning capabilities.
Even in very high wind zones spans of up to 4500mm are achievable, this gives approximately an extra metre of span over other product currently available.
Featuring 200mm wide, flat, rectangular-shaped louvre blades that provide bold, angular lines and sharp, clean edges for larger spans. The 200 Super Roof also comes with a 185mm extra wide gutter to all four sides as standard.
An ideal, adjustable cover solution for large deck areas.
Blades open and close to 180°.
Designed and manufactured locally for New Zealand and Australian conditions.
Opening Roof Louvres can be motorised or manually adjustable.
Can be fitted into a frame and posts made of Aluminium, timber, steel or concrete or be fixed directly into a prepared opening in a roof structure. Frame and posts other than Aluminium by others
Engineered to meet relevant AS/NZS standards
All extrusions manufactured in an ISO quality assured environment to AS1866 and AS3902 standards
Plastic injected components (motorised and manual) are UV stabilised
Drive axles(motorised and manual) and all fixings are marine grade 316 stainless steel
Can be powdercoated, anodised or woodgrain finished to large range of colours
Full site measure, design, shop drawing (if required) and installation service provided
Used as a weather resistant cover over decks/ patios, outdoor restaurants/ bars, outdoor areas, school play areas, smoking areas, pool/spa covers.
Suitable for coastal, inland, snow, residential, commercial installation.
Opening Roofs are generally installed horizontally overhead. Can be installed on an angle. Can be an irregular shape(refer Louvretec design office)and can be motorized or manually adjustable using the Louvretec Spiral Pivot system.
The Spiral pivot system allows for 180° rotation of the louvres.
Louvre/Beam/Post spans, as per tables 1 and 2, section 12 of the Louvretec Product Catalogue, are certified by Markplan Consulting Limited (Consulting Structural Engineers) and meets the requirements of AS/NZS 1170:2011, NZS3604:2011, AS/NZ 1664:1997.
Limitations on Use
Louvre/Opening Roof spans are restricted by wind zone. Refer relevant table in Louvretec Product catalogue.
Minimum depth of frame is required. Refer Louvretec design office.
Opening Roofs cannot be used as a weather proofing solution to a building.
Supporting structures over 10m high may require specific engineering.
Corrosion Exposure Zone D
Very High Earthquake Zone
Extra High Wind Zone
Specific Design Wind Zone
Statement of Building Code Compliance
Refer to attached Engineering notes and PS1 provided by Markplan Consulting Limited(Consulting Engineers) with regard to B1 and B2.
The Louvretec 200 Super Opening Roof has been part of the Louvretec range since 1999 being used in residential and commercial applications in New Zealand. Off shore it has been used in Australia and many other countries including the Netherlands, Tahiti, Fiji, Hong Kong and the United States (California).
The Louvretec Spiral Pivot system for motorised and manual applications was introduced in 2003 and is used in most Louvretec motorised / manual systems.