• FUTUREWOOD Enviroslat Fencing is designed to be fixed directly to posts that are fixed in/on the ground. The posts can be made of timber, steel or alumnium, and should be suitable where microclimate conditions apply as defined in NZS3604:2011 and need to be of a suitable cross section and strength to hold the intended fence size/weight.
• All screws should be plated or made from stainless steel or brass to meet the enviromental climate coditions. 
• If coloured screws are required we suggest pre painting therse before installtion.  
• FUTUREWOOD Enviroslat Fencing should be fixed with one screw at each support point.

• Nailing is not recommended. 
• FUTUREWOOD Enviroslat Fencing will expand or contract in length with rising or falling tempertures. All boards should be conditioned before cutting so that they are at an even temperture. Boards are best cut in the the shade before they exposed to radiant heat, in the morning. 
• The colour will weather in the first 4-12 weeks of exposure to the elements. After the initial weathering process, the colour will stabilise with only slight changes year on year.

Mulford New Zealand relies on the claims of the manufacturer in making these claims. Enviroslat Fencing will comply with or contribute to compliance with the following performance criteria, as applicable.

• B1 (Structure): B1.3.1, B1.3.2, B1.3.3 (a, h, q)
• B2 (Durability): B2.3.1 (b), B2.3.2 (b)
• F2 (Hazardous Building Materials): F2.3.1. 

FUTUREWOOD has been used in New Zealand since 2012. 

• Limited on-going maintenance with periodical cleaning, no painting, staining required
• 10 year warranty