The Warmup Waterproofed Shower Systems may be used in the following areas:

• Wet areas: all floor areas in a wetroom
• Semi-wet or dry areas or floor areas adjacent to sanitary fixtures such as baths, tubs and basins

Suitable for:

• The system is suitable for concrete or timber floors
• Level entry or low-profile thresholds
• Traditional centre and off-centre wastes as well as a full range of increasingly popular channel linear drains
• Glass incorporated: Full range of 10mm frameless — standard sizes for economy or custom-fitted

The Warmup Wetroom System has been appraised (BRANZ Appraisal 774 [2024]) for use in internal wet areas of buildings within the following scope:

• On floor substrates of concrete, plywood, compressed fibre cement sheet and fibre cement sheet tile underlay, and on wall substrates of concrete, concrete masonry, wet area fibre cement sheet lining systems and wet area plasterboard lining systems; and
• On structural floors and walls complying with the NZBC; and,
• Where floors are designed and constructed such that deflections do not exceed 1/360th of the span; and,
• Where floors are designed not to exceed a continuous operating temperature of 35deg C; and,
• When protected from physical damage by a screed and ceramic or stone tiles

Show more

The Warmup Waterproofed Shower System will meet the following provisions of the NZBC:

• Clause B2 DURABILITY: Performance B2.3.1 (b), 15 years and B2.3.2. The Warmup Waterproofed Shower System meets these requirements. See Paragraphs 8.1 and 8.2
• Clause E3 INTERNAL MOISTURE: Performance E3.3.4, E3.3.5 and E3.3.6. The Warmup Waterproofed Shower Systems meets these requirements. See Paragraphs 10.1 - 10.6.
• Clause F2 HAZARDOUS BUILDING MATERIALS: Performance F2.3.1. The Warmup Waterproofed Shower Systems meets this requirement and will not present a health hazard to people

Show more

BRANZ Appraised