You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

InteriorInterior
23 November 2026

How Much Does an Environmental Product Declaration (EPD) Cost in New Zealand?

green world

Overview

An EPD for a simple NZ-made product typically costs around $20,000 to $40,000 (ex GST) with a consultant.

Using software and your own staff, it ranges from around $17,500 to $43,000 (ex GST).

Figure 1 sets out the steps to develop an EPD, and we break down the cost of each below.

Figure 1: Steps to develop an EPD:

Getting started – research and grouping

The first step is to confirm which rules apply. For construction products, that is usually EN 15804+A2.

Next, working out how to group products into EPDs can be challenging and requires careful thought and often preliminary modelling. Similar products may be grouped into a single EPD, but need to follow rules for what ‘similar’ is. The grouping decides how many EPDs you need, so getting it right early has a big effect on the data collection and the end cost.

Estimate: $1,200 to $4,000 with a consultant, or $500 to $1,000 in staff time in house.

Data collection

Once the applicable rules are known, data collection is often the biggest part of a project, even for a less complicated product. It takes time to contact suppliers, get evidence and the data you need, and it’s critical that the data is accurate and defensible.

If you already report an annual carbon footprint, much of the site data, like electricity and fuel use, may already exist.

Estimate: $5,000 to $11,000 with a consultant, or $2,500 to $3,000 in staff time in house.

EPD modelling and report

Once your data is ready, you can build the LCA model. The LCA model maps the flows of energy, water, materials, and emissions.

The LCA background report and EPD must meet the relevant standards and Product Category Rules (PCR), sensitivity tests need to be done, and the whole report can be significant, around 50 – 100 pages long.

There are two ways to complete the reporting: with a consultant, or supported with software.

Not all software is the same; basic tools only generate raw data and require further work to draft a compliance-ready report. Premium software can export the LCA report and complete EPD, although you’ll likely still need additional review and formatting before publication. Software costs more than most people expect because of the licences needed to use the ecoinvent database (or similar).

Software may be suited to large companies with in-house sustainability teams and LCA skills, or when many EPDs are needed.

Estimate: $7,000 to $13,000 with a consultant, or $2,500 to $3,000 in staff time in house.

Verification

Every EPD must be independently verified before publication, unless it is made with a pre-verified tool. The verifier must be an EPD Australasia approved individual verifier or an accredited certification body (EPD Australasia).

Estimate: from $4,000.

This is where software tools, in theory, offer cost savings by saying they are ‘pre-verified’. However, in reality it can be more complex. Pre-verification often only applies to specific products and typically kicks in after you have verified several of your EPDs. In principle, that process is free, and that is where you can save money if you need multiple EPDs.

EPD Australasia fees

The final step is to register your EPD. EPD Australasia registers and publishes EPDs in New Zealand and Australia. Fees depend on company size: there is a one-off joining fee from $1,200 - $1,800 plus an annual fee from $800 to $4,800 for companies, depending on size.

Estimate: $2,000 to $6,600 in year one, then $800 to $4,800 a year.

Summary of total costs

Table 1 shows the summary of the EPD costs. The in-house estimates assume your staff already have some experience in data collection and an understanding of LCA modelling and EPD reporting. Without this, allow extra budget for consultant support. Staff time is costed at $50 an hour.

About MyImprint

MyImprint is New Zealand owned and operated. Our LCA team has published EPDs and LCAs for cladding, insulation and foundation systems, as well as whole-building assessments. Curious to know more, or want a free quote? Get in touch at myimprint.nz.

comments powered by Disqus

Posts by William Clouston

See All

Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.