• Mapefloor PU 400 LV is used to create elastic waterproof resin systems for concrete floorings of parking lots in the following situations:
• As a highly elastic waterproof membrane for the Mapefloor Parking System HE, compliant the requirements of the class OS 11a (EN 1504-2)
• As an elastic waterproof wearing layer for the Mapefloor Parking System ME, compliant the requirements of the class OS 11b (EN 1504-2)
• For further information regarding the characteristics of each system, please refer to the relevant data sheets

Show more

• Low VOC emission (CDHP standard)
• It can contribute to LEED credits
• EPD (Environmental Product Declaration) compliant
• Complies with the principles defined in EN 1504-9 (“Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - General principles for the use of products and systems”)and the minimum requirements of EN 1504-2, coating (C) according to the PI, MC, PR and IR principles (“Surface protection systems for concrete”).

Show more

• As a coating for indoor and outdoor surfaces such as tennis courts, basketball courts, skating rinks, velodromes, multi-sport courts and multi-purpose surfaces.
• To make and restore sports surfaces coated with synthetic resin
• Protecting and colouring the surface of concrete in areas subject to a high level of footfall, such as spectator stands in sports facilities.
• Protecting and colouring surfaces made from concrete, architectural decorative concrete, self-locking blocks
• Protecting and marking out the surface of bitumen conglomerate, such as at racetracks
• Protecting and marking out the surface of access/exit routes in sports facilities, such as ramps and parking areas
• Colouring and protecting concrete architectural elements, such as kerbs on car and motorcycle racetracks
• Marking out cycle lanes/tracks and pedestrian areas and areas accessible to light vehicles
• Coating and colouring wet areas subjected to heavy footfall, such as around the edges of swimming pools
• Demarcation lines and safety markings

Show more

The Mapefloor TNS Systems have been used by councils New Zealand wide to create public sports facilities.

Show more

Mapefloor I 302 SL is used to create smooth self-levelling or rough multi-layer resin systems for floors in various sectors, such as:

• Chemical and pharmaceutical industries;
• Cleanrooms in the electronics industry, optics, medical devices, laboratories, etc;
• Aseptic rooms in healthcare environments, operating theatres, hospitals, etc.;
• Cleanrooms in pharma and food packaging areas, etc;
• Food industries in general;
• Artisan workshops;
• Warehouses;
• Offices, museums, showrooms;
• Hangars, aeronautical or automotive industries;
• Manufacturing industries in general;
• Shopping centres, residential and tertiary buildings, infrastructures;

Mapefloor I 302 SL can also be used as a binder for "Terrazzo alla veneziana" resin-based systems, such as Mapefloor System 35 F/M.

Show more

• Fulfils HACCP requirements.
• Complies with the standards applied in the foodstuffs sector EN 1186, EN 13130 and prCEN/TS 14234, as well as the Decree Of Consumer Goods that represent the conversion of European directive 89/109/EEC, 90/128/EEC and 2002/72/EC for contact with foodstuffs.
• Low VOC emission (CDPH standard)
• Sustainability: can contribute to LEED credits.
• EPD (Environmental Product Declaration) compliant.

See TDS for full information

Show more

Environmental Product Declaration (EPD)