Mapefloor I 302 SL is used to create smooth self-levelling or rough multi-layer resin systems for floors in various sectors, such as:

• Chemical and pharmaceutical industries;
• Cleanrooms in the electronics industry, optics, medical devices, laboratories, etc;
• Aseptic rooms in healthcare environments, operating theatres, hospitals, etc.;
• Cleanrooms in pharma and food packaging areas, etc;
• Food industries in general;
• Artisan workshops;
• Warehouses;
• Offices, museums, showrooms;
• Hangars, aeronautical or automotive industries;
• Manufacturing industries in general;
• Shopping centres, residential and tertiary buildings, infrastructures;

Mapefloor I 302 SL can also be used as a binder for "Terrazzo alla veneziana" resin-based systems, such as Mapefloor System 35 F/M.

• Do not apply Mapefloor I 302 SL directly on cementitious substrates with moisture content higher than 4% and/or with capillary rising damp (contact MAPEI Technical Service).
• Do not dilute Mapefloor I 302 SL with solvent or water.
• Do not apply Mapefloor I 302 SL on dusty or crumbling substrates.
• Do not apply Mapefloor I 302 SL on substrates with oil or grease stains or dirt in general.
• Do not apply Mapefloor I 302 SL on substrates which have not been previously primed with Primer SN or with another specific primer and have not been prepared as specified.
• Do not mix partial quantities of the components to avoid mixing errors; the product may not harden correctly.
• Do not expose the mixed product to sources of heat.

• Fulfils HACCP requirements.
• Complies with the standards applied in the foodstuffs sector EN 1186, EN 13130 and prCEN/TS 14234, as well as the Decree Of Consumer Goods that represent the conversion of European directive 89/109/EEC, 90/128/EEC and 2002/72/EC for contact with foodstuffs.
• Low VOC emission (CDPH standard)
• Sustainability: can contribute to LEED credits.
• EPD (Environmental Product Declaration) compliant.

See TDS for full information