Suitable for residential and light commercial interior installations where a flush switch aesthetic is required throughout. IP20 rated for indoor locations only, not suitable for exterior installations, or corrosive environments.

Not suitable for exterior or exposed installations. Dimmer variants require a minimum load of 3W and are not suitable for motor loads. Maximum LED load of 150W applies to dimmer variants, with load de-rating required when multiple dimmers are ganged in the same plate. Push button switch variants are not suitable for dimming applications. Momentary slave variants must be paired with a compatible primary Vynco push button switch or dimmer - they cannot operate as standalone devices. Compatible with Vynco switch plates only. Maximum of 10 slave switch plates per primary switch or dimmer.

• Supplier delcaration of conformity available
• Designed, engineered and tested in NZ to New Zealand/Australian Standards

Vynco has previously supplied a range of electronic dimmer mechanisms to the New Zealand residential and light commercial market. This established range has been successfully used in installations across New Zealand, providing confidence in the underlying technology and supply chain. The new Electronic Push Button Range builds on this experience, introducing a flush button format and expanded functionality including push button switching and multi-way momentary control. The range is manufactured to AS/NZS60669.2.1 and is distributed and supported by Vynco, a 100% New Zealand owned and operated company.

• IP20 rated
• Compliant with AS/NZS60669.2.1