• Residential and commercial applications such as cafés and restaurants
• Maximum size: 4500mm wide x 3000mm drop; with a maximum square meterage of 12m²
• Winds up to 65km/h
• Fabric options for privacy, sun-blocking, or preserving light/view
• Option to include a draft strip (approx 200mm drop by the width of the blind) fitted to the underside of the bottom rail. The draft strip covers the component space taken to anchor the bottom rail to the ground fixing points

Operation:

• Manual or motorised operation
• Manual crank handles available in 1m, 1.5m, 1.8m, or 2.2m to suit the location requirements for manual operation
• Optional motorisation:
  
  • Range of Somfy 240v motors, depending on blind size
  • Controls via either hard wired or remote control (handheld or wall mounted)

• To preserve the life of Cafe Blinds it is recommended to allow Clear PVC, Techno X & Standard awning fabric to dry before rolling up.
• Not suitable for winds over 65km/h.
• Somfy automatic Wind and Sun sensors are not suitable for Café Blinds given that the bottom rail is physically anchored to the ground when the blind is in the down position.

Window Treatments has nationwide service coverage and has been operating since 1984.

• Somfy motor options all with IP 44 rating. See Specification Sheet for full performance information.
• The Café Blind carries our standard three-year warranty. This warranty covers repair or to make good any defects in materials or workmanship.
• Coastal maintenance recommendation: wash components and rails with fresh water 3–4 times per year.