PLT panels are suitable for use as floor and roof structures including diaphragm applications:

• In any wind zone or calculated wind pressure (ULS)
• In all exposure zones, excluding microclimates as defined in NZS 3604:2011
• In conjunction with a primary structure that complies with the NZ Building Code or where the designer has established that the existing structure is suitable for the intended building work
• In all hazard classes up to and including H3.2
• As a diaphragm where specifically designed
• In applications where NZ Building Code Clause C6 (structural stability) obligations apply
• Woodspan PLT Panels may be used with residential and commercial floor loadings up to 3.0kPa

Show more

If designed, installed and maintained in accordance with all Woodspan requirements, Woodspan PLT Panels will comply with or contribute to compliance with the following performance claims:

• B1 Structure: B1.3.1 B1.3.2 B1.3.3 (a, b, c, f, i, j, m, q) B1.3.4 (a, b, c, d, e) — Verification Method B1/VM1, AS/NZS 1170:2002 set, AS/NZS 1328:1998 (parts)
• B2 Durability B2.3.1 (a) B2.3.2 (a) — Acceptable Solution B2/AS1
• C6 Structural Stability C6.2 C6.3 — Verification Method B1/VM1, NZS 3603:1993
• F2 Hazardous Building Materials F2.3.1

Show more

FSC Certified

PASS

PLT panels are suitable for use as floor and roof structures including diaphragm applications:

• In any wind zone or calculated wind pressure (ULS)
• In all exposure zones, excluding microclimates as defined in NZS 3604:2011
• In conjunction with a primary structure that complies with the NZ Building Code or where the designer has established that the existing structure is suitable for the intended building work
• In all hazard classes up to and including H3.2.
• As a diaphragm where specifically designed.
• In applications where NZ Building Code Clause C6 (structural stability) obligations apply.
• Woodspan PLT Panels may be used with residential and commercial floor loadings up to 3.0kPa
• Available in 90mm, 117mm and 140mm thicknesses giving multiple spanning options. Maximum panel size 7200mm x 890mm

Show more

If designed, installed and maintained in accordance with all Woodspan requirements, Woodspan PLT Panels will comply with or contribute to compliance with the following performance claims:

• B1 Structure: B1.3.1 B1.3.2 B1.3.3 (a, b, c, f, i, j, m, q) B1.3.4 (a, b, c, d, e) — Verification Method B1/VM1, AS/NZS 1170:2002 set, AS/NZS 1328:1998 (parts)
• B2 Durability B2.3.1 (a) B2.3.2 (a) — Acceptable Solution B2/AS1
• C6 Structural Stability C6.2 C6.3 — Verification Method B1/VM1, NZS 3603:1993
• F2 Hazardous Building Materials F2.3.1

Show more

FSC Certified

PASS