You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

StructureStructure
EnclosureEnclosure
InteriorInterior
FinishFinish
ServicesServices
ExternalExternal
Privacy and Data Policy Terms of Use
© Quad Concepts Ltd.
Multipak Gas Continuous Flow Water Heaters
Rheem
All products
multipak
Description

A staged ignition system available pre-plumbed and on a frame with two to six Commercial Continuous Flow Units. Typically used where large demands are required intermittently such as in sports clubs. In 60°C temperature mode, Multipak is suitable for use in dead leg and reticulation systems.

Key Features
  • 84% thermal efficiency heat source 6 Star heat source
  • Vitreous enamel storage tank up to 82°C operation
  • Large flow 50mm storage tank fittings
  • Digital temperature display
  • Indoor and outdoor models available

Available in the following model configurations:

  • Multipak MPI02 | 27 L/min Max Flow Rate at 50°C Rise | Indoor Installation
  • Multipak MPE02 | 27 L/min Max Flow Rate at 50°C Rise | Outdoor Installation
  • Multipak MPI03 | 41 L/min Max Flow Rate at 50°C Rise | Indoor Installation 
  • Multipak MPE03 | 41 L/min Max Flow Rate at 50°C Rise | Outdoor Installation 
  • Multipak MPI04 | 54 L/min Max Flow Rate at 50°C Rise | Indoor Installation
  • Multipak MPE04 | 54 L/min Max Flow Rate at 50°C Rise | Outdoor Installation 
  • Multipak MPI05 | 68 L/min Max Flow Rate at 50°C Rise | Indoor Installation
  • Multipak MPE05 | 68 L/min Max Flow Rate at 50°C Rise | Outdoor Installation
  • Multipak MPI06 | 81 L/min Max Flow Rate at 50°C Rise | Indoor Installation
  • Multipak MPE06 | 81 L/min Max Flow Rate at 50°C Rise | Outdoor Installation 
Categories
Hot Water Heaters and Systems
Ranges
Hot Water Heating for Apartments & Residential Complexes Industrial & Commercial Water Heating Solutions Commercial Gas Continuous Flow Water Heating Hot Water Heating for Hospitals and Care Homes
Scope of Use
  • Commercial applications - typically where large demands are required intermittently such as in sports clubs
  • In 60°C temperature mode, Multipak is suitable for use in dead leg and reticulation systems
  • Can deliver temperatures up to 82°C for sanitising requirements
Limitations on Use
  • Choose correct model to suit either indoor or outdoor installation
  • Gas, water and power are required to operate a Gas Continuous Flow Water Heater
  • Indoor models must be installed using a certified Rheem Flue System —Always check with local authorities that the installation complies with all regulations applicable in the area
Other Performance Attributes
  • Non-Domestic Warranty: Parts (Parts/Labour): 1 year
Documents
Installation Instructions & Owner's Guide
URL
Brochure
URL
Additional information
URL

Rheem® provides reliable, efficient water heating and now also the latest in Solar PV heating.

Product Enquiries

News from Rheem

Supporting Affordable Housing Outcomes with Replacement-Ready Water Heating Systems
Supporting Affordable Housing Outcomes with Replacement-Ready Water Heating Systems
Rheem
July 2026 Product News
Solar on Low Pitch Roofs: Designing Effective Solutions with Adjustable Tilt Racking
Solar on Low Pitch Roofs: Designing Effective Solutions with Adjustable Tilt Racking
Rheem
April 2026 Product News
Why Like-for-Like Hot Water Replacement Matters for Interiors
Why Like-for-Like Hot Water Replacement Matters for Interiors
Rheem
March 2026 Product News
View all news

Popular Products from Rheem

All Pressure™ Vitreous Enamel Electric Hot Water Cylinders
All Pressure™ Vitreous Enamel Electric Hot Water Cylinders
Rheem
Zip Manual Boiling Water
Zip Manual Boiling Water
Rheem
GoodWe ESA Solar Battery NEW
GoodWe ESA Solar Battery
Rheem

View all products

Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.