• Intended for toilets in hospitals and similar situations where emergency access may be required
• The door set can be supplied for interior use in dry or wet areas. 
• The Emergency Access door set has a specific handing, LH (Left Hand) or RH (Right Hand), because of the orientation of the retractable doorstop.

Hardware:

• The Emergency Access door set is supplied fitted with pivot hardware and a retractable stop.
• Additional latching hardware and furniture can be fitted (by others) on site.
• The door frame can be prepared for standard mortice lock hardware, with a custom strike plate, if required.

Leaf Type:

• Core: Solid Core
• Cappings: Pacific anodised aluminium extrusion capping to long edges.
• Facings: ;High Pressure Laminate (e.g. Formica or HPL) or sheet Vinyl (preferably flooring grade) over Medium Density Fibreboard.
• Leaf Thickness: Nominal 47mm thick.
• Leaf Sizes: The Emergency Access door set is available for manufacture to any practical size to suit client requirements. Thought should be given to the available sizes of leaf facings so that there are no visible joins, and so that the structural integrity of the door is not compromised.

Leaf Facings:

The facings listed below are available for the Emergency Access door set.

• MDF
• Oil Tempered Hardboard
• Hardboard
• Plywood
• Timber Veneers
• Metal Sheet, mild or stainless (0.6 - 1.0mm)
• Aluminium Sheet (0.3 - 1.0mm)
• High Pressure Laminate up to 1.5mm thick (eg: Laminex, Formica)
• Sheet Vinyl (1.25 - 2mm)

• Note that wet area doors must be identified at time of order.
• Meeting Stiles: This door set is not available as a pair of door set.