• Vauth-Sagel kitchen storage pull outs are suitable for residential use throughout the home; kitchens, pantries, sculleries. They also have applications in laundries, home offices, and garages.
• Designed for narrow tall cabinet installations in new custom joinery or existing cabinetry retrofits. 
• Mechanism mounts to the right-hand internal side panel of the cabinet.
• Fits cabinet widths of 150mm, with a minimum required internal cabinet height of 1780mm and a minimum internal depth of 500mm.

• Total load capacity must not exceed 25kg. 
• Not suitable for cabinets with an internal cabinet width of less than150mm, an internal height of less than 1780mm or an internal depth under 500mm. 
• Side-Specific Mounting: Mechanism mounts exclusively to the right-hand internal side panel of the cabinet. 

Suitable for residential use, taking into account the following:

• Recommended maximum cabinet widths, depths and heights.
• Be familiar with the load capacity of the unit and do not exceed it.
• To avoid base panel sagging, sufficient support for the cabinet base is required. Warranty depends on adequate support being installed.
• When opening and closing unit or when putting items into it, do not apply strong downward force as this may cause damage.
• Do not use caustic cleaners on any part of the unit. Some dishwasher powders and laundry powders are particularly caustic, as are dry salt, salt water and any citrus juice. If they spill onto or into the unit, remove the powder promptly with a vacuum cleaner, soft brush or damp cloth taking care to re-wipe the surface clean after rinsing cloth free of substance and ensure it is dried well.

Refer to the Care & Maintenance document for further detail.

FIT first brought the narrow general storage and bottle storage variants of Vauth-Sagel’s fixed front pantry to the New Zealand market in 2016. The variants with powder-coated wire replacing the less sustainable chromed wire were launched in 2026.

• 25kg load capacity

Warranty

FIT warrants the original purchaser of products against manufacturing defects for as long as the original purchaser owns the product. This warranty applies to all non-electrical products sold by FIT in New Zealand and Australia.

The warranty covers replacements for faulty goods only. Replacements will be supplied to the original purchaser only. If the identical item is no longer available, FIT will replace with the closest item from their current product selection. The warranty does not include any labour or other associated expense that may be involved in removal or installation of the product. The warranty does not apply if products have been incorrectly installed, have been subjected to loads in excess of specifications and/or have been subjected to uses/purposes for which they are not expressly intended. FIT’s liability is limited to the goods themselves and does not cover any consequential or incidental damages contributed to or resulting from the use, installation, performance or failure of products.

In New Zealand this warranty is additional to the conditions and guarantees of the Consumers Guarantee Act (1993).