Salice’s Wind overhead door lift system is suitable for residential use throughout the home and also for light commercial use; kitchens, bathrooms, living rooms, bedrooms, garages, and offices.

See PDF for details of door weight limits, which are related to door size (height and width). As an approximate guide to calculating door weight, for 16mm board allow 11.84kg/m² and for 18mm board allow 13.32kg/m².

• Paired options for 5 levels of door weight W, D, I, F and S weight classes)
• A separate set of 5 kits are available for handleless doors for push to open functionality
• For wide doors, a third (single) lift is available to supplement pairs and prevent door bowing
• Stop device is pre-fitted to limit door opening to 85/86°. If removed, door can open to 94°
• Paired Lift kit contains: 2 cups, right hand system and plate, left hand system and plate, fixing screws, drilling template, cover, cover caps
• Single Lift Supplement kit contains: one system, carrier, screws to fit plate to carrier, cover for carrier

• Suitable for residential use, taking into account door weight limits.
• For details of door weight limits, which are related to door size (height and width), refer to the information PDF.
• As an approximate guide to calculating door weight, for 16mm board allow 11.84kg/m² and for 18mm board allow 13.32kg/m²
• A separate set of 5 kits are available for handleless doors for push to open functionality. Note that Wind Push to Open requires the addition of Salice’s Magnetic Push to Open System to hold closed. Because there are multiple installation options for the Magnetic Push to Open system, it is not included in the Wind kit and must be ordered separately.
• Refer to the Care & Maintenance document for further detail.

FIT first brought the Salice Wind overhead liftto the market in August 2018. Push to open functionality was added in March 2019.

Warranty

FIT warrants the original purchaser of products against manufacturing defects for as long as the original purchaser owns the product. This warranty applies to all non-electrical products sold by FIT in New Zealand and Australia.

The warranty covers replacements for faulty goods only. Replacements will be supplied to the original purchaser only. If the identical item is no longer available, FIT will replace with the closest item from their current product selection. The warranty does not include any labour or other associated expense that may be involved in removal or installation of the product. The warranty does not apply if products have been incorrectly installed, have been subjected to loads in excess of specifications and/or have been subjected to uses/purposes for which they are not expressly intended. FIT’s liability is limited to the goods themselves and does not cover any consequential or incidental damages contributed to or resulting from the use, installation, performance or failure of products.

In New Zealand this warranty is additional to the conditions and guarantees of the Consumers Guarantee Act (1993).