• For residential use in kitchens and sculleries
• Cost-effective option for multi-unit developments, particularly where the soft close drawer brand is already specified
• Made to sit on a slimwall soft close drawer in the cabinet
• Options are available to suit cabinets 300mm, 350mm, 400mm and 450mm wide

Suitable for residential use, taking into account the following:

• Take care not to damage painted surface of the metal frames with hard or metallic objects. If the paint does become chipped, it is recommended that the chip is repaired with a touch-up paint as recommended by a reputable paint supplier.
• Do not use caustic cleaners on any part of your Tanova FLEX unit.
• Some dishwasher powders are particularly caustic, as are dry salt, salt water and any citrus juice. If they spill onto your Tanova unit frame, remove the powder promptly with a soft brush or damp cloth taking care to re-wipe the surface clean after rinsing cloth free of substance.
• Painted steel parts – clean with a soft brush or cloth, using warm water and a mild soap such as dishwashing liquid, which will help break down any stains. Avoid harsh chemicals.
• Plastic buckets – to avoid odours, regularly wash out with warm water and dishwashing liquid, rinse well and dry. If possible, leaving to dry in the sun is a great idea.
• Plastic buckets are dishwasher safe.
• Refer to the Care & Maintenance document for further detail.

FIT launched the Tanova FLEX system in mid-2024 after extensive consultation with Kiwi kitchen designers and makers. During 2025, the ‘BASE’ options without top cover were added to the range at the request of trade partners looking for even more cost-effective options.

Warranty

FIT warrants the original purchaser of products against manufacturing defects for as long as the original purchaser owns the product. This warranty applies to all non-electrical products sold by FIT in New Zealand and Australia.

The warranty covers replacements for faulty goods only. Replacements will be supplied to the original purchaser only. If the identical item is no longer available, FIT will replace with the closest item from their current product selection. The warranty does not include any labour or other associated expense that may be involved in removal or installation of the product. The warranty does not apply if products have been incorrectly installed, have been subjected to loads in excess of specifications and/or have been subjected to uses/purposes for which they are not expressly intended. FIT’s liability is limited to the goods themselves and does not cover any consequential or incidental damages contributed to or resulting from the use, installation, performance or failure of products.

In New Zealand this warranty is additional to the conditions and guarantees of the Consumers Guarantee Act (1993).