Suitable for interior and exterior use.

Dulux Aquanamel Gloss can be applied on properly prepared and primed/undercoated paper faced wallboard, brick, set plaster, fibrous plaster, bare timber and previously painted surfaces.

Darker colours will show more signs of marking and scuffing than lighter colours. If you are considering using a darker colour in a high traffic area, we recommend the use of a protective clear coat such as Intergrain UltraClear.

All preparation and painting must conform to AS2311: The Painting of Buildings. Do not paint at temperatures below 10C or when the temperature of surface may fall below 10C during the drying period. Avoid exposure to steam and condensation for 48 hours after application. Although film is dry to touch in 30 minutes, allow 7 days for film to fully cure before cleaning with a cloth, or soft brush wet with detergent solution.

Tinted colours: Ensure that paint is thoroughly shaken and stirred immediately after addition of tinter to can and again before use.

• Non-yellowing and resists chipping
• Eco Choice Aotearoa