• Suitable as a finish for exterior timber.
• Timbacryl provides long lasting exterior decoration and protection for masonry, bricks, concrete, render, fibre cement, exterior timber – including dressed and rough sawn timber, outdoor timber furniture, pergolas, fascia boards, lattices and fences – and correctly primed zincalume, galvanised iron, steel and wrought iron.

Check the adhesion of old paint by cutting an 'X' through the film with a razor blade or trimming knife, press cellulose tape firmly across the cut and rip it off. If the old paint comes off with the tape it should be removed before painting.   

Occasionally when dew or condensation forms on a newly dried film a slight milky deposit will be observed on the film. This is quite normal and does not impair the performance. Simply hose or wipe it off with a damp rag.   

Do not paint at air or surface temperatures below 10°C or when temperatures may fall below 10°C during the drying period.   

Do not apply to roofs or surfaces used for the collection of drinking water.   

Caution — Check with the substrate manufacturer before painting colours of LRV<40 

• Eco Choice Aotearoa approved (License No: 705019)
• 10 year guarantee*

*Refer to product label for full conditions. This guarantee does not limit and may not necessarily exceed your rights under the Consumer Guarantees Act 1993.