• Commercial and Retail Fit-outs: Suitable for fast-track commercial office linings, retail store walls, feature corridors, and interior partitions.
• Multi-Unit and Residential Housing: Recommended for internal room linings, hallway walls, and wardrobe interiors in place of standard painted plasterboard.
• Educational and Institutional Facilities: Suitable for interior wall areas where durable, low-maintenance pre-finished wall paneling is specified.

• Interior Applications Only: Restricted exclusively to dry, climate-controlled interior wall applications.Non-Structural: Cannot be used as a structural bracing panel or load-bearing wall lining.
• Wet Area Limits: Not suitable for direct wet-area wall linings (such as inside shower enclosures or areas subject to standing water).
• Substrate Clearance: Panels must be installed with a 10mm clearance maintained from finished floor and ceiling surfaces during installation.

Compac Panels SwiftLiner, if designed, used, installed, and maintained in accordance with the conditions of Compac Panels' technical literature, will comply with, or contribute to compliance with, the following performance provisions of the NZ Building Code:

• Clause B2 DURABILITY: Performance B2.3.1(c) 5 years.
• E3 Internal Moisture: E3.3.5
• Clause F2 HAZARDOUS BUILDING MATERIALS: Performance F2.3.1.

SwiftLiner is made in Dargaville and has been used in projects around the country since 2023.

• New Zealand made MDF substrates meets ultra-low formaldehyde emission criteria — E0 (< 0.5 mg/L).   
• Core wood fibre is sourced from FSC-certified New Zealand radiata pine forests.  
• Renewable Energy Manufacturing: Manufactured in a facility running on 100% electricity sourced from New Zealand's grid (82% renewable).
• Waste Minimisation: Cardboard packaging materials are recycled locally, and clean wood waste is diverted to agricultural composting

Warranty

• Supported by a 10-year manufacturer's warranty against faulty materials or lamination defects when handled, stored, and installed in accordance with Compac Panels' specification guidelines