• Soundproofing against airborne noise in vertical walls with a low surface density (lightweight partition walls or boards made of different materials)
• Soundproofing against airborne and rain noise in ceilings and lightweight roofs
• Reduction of impact noise level in all types of floors, sandwiched between floor slabs and loose laid flooring.

• For interior use only.
• Shall not commence until the building is water tight and dry
• Operating service temperature shall be between -10° up to 70°C
• Substrate must be even, clean and dry. Plasterboard joints shall be sealed to avoid adherence problems
• Horizontal application must be on the back of linings. Do not attach underneath horizontal surfaces.

NZ Building Act

• This product is not subject to a warning or ban under Section 26.

NZ Building Code Compliance:

• B2 Durability – Clause B2.3.1 (b) (i): Soprema Tecsound SY will have a minimum durability of at least 15 years when installed in accordance with manufacturer’s installation requirements.
• C3 Fire – Clause C/AS2 4.12.1: Soprema Tecsound SY has a Fire Material Group Number 1-S (B-s1/s2) by NZBC Building Product Specification Parts 8.5.3.1 a), based on classification from BS EN 13501-1:2018.

Soprema LLC, for more than 100 years, is an international company specialising in developing high end sound proofing solutions and products for the building industry.

• Tecsound SY50 has a Sound Reduction Index of STC/Rw 26