You are using an outdated browser version not supported by this website.
Click here to upgrade your browser
5,470 products with technical literature, drawings and more from leading suppliers of NZ architectural materials.
Case studies, new products and product news from leading suppliers of NZ architectural materials.
Blogs for architectural specifiers, offering product, design and business advice.
ACMF’s aluminium heat pump covers screen the machinery behind clean horizontal louvres, creating a more cohesive exterior on decks, beside entrances and beneath windows. Fabricated in Auckland, each cover combines overlapping aerofoil louvres with a solid aluminium top and a powder-coated finish. Air can pass through the front and both sides, while the open back accommodates a position against the wall.
ACMF Heat Pump Covers are intended for exterior use on residential buildings to screen outdoor heat pump units from view. Typical locations include decks, areas beside entrances and beneath windows. The open-backed design allows the cover to be positioned adjacent to an exterior wall where the heat pump manufacturer’s required airflow and servicing clearances can be maintained.
Covers are available in two standard sizes and can be made to measure. Select the cover to suit the outdoor unit’s make, model and dimensions, allowing for the manufacturer’s required clearances. Confirm project-specific suitability with ACMF for the site’s wind zone, corrosion exposure and any applicable seismic fixing requirements.
Suitability depends on the make, model and dimensions of the outdoor heat pump unit and the available space around it. Use the cover only where the heat pump manufacturer’s required clearances for air intake, discharge and servicing can be maintained.
ACMF Heat Pump Covers are powder-coated aluminium screens for outdoor heat pump units. A New Zealand Building Code compliance declaration has yet to be issued for this product.
ACMF Heat Pump Covers were introduced to the New Zealand market in 2026 for residential installations.
The cover is fabricated from aluminium with a powder-coated finish for exterior use. The solid aluminium top helps shield the outdoor unit from direct sunlight, rain and falling leaves. The louvred front and sides allow air to pass through the cover when the heat pump manufacturer’s airflow clearances are maintained.
ACMF are exterior experts, looking after the whole building envelope — cladding, flashings, louvres and screens, balustrades, roofing and fire-rated aluminium joinery.
Product EnquiriesNew and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.




