You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

CS AluTec

The CS AluTec is a flush pre-finished door with no visible screws or fastenings and a neat edge clashing detail which runs down the vertical edges of the door. Constructed entirely of aluminium, this door is designed to reduce the risk of rust, rot or bow. The CS AluTec is suitable for sliding, pivot and hinged door applications where an oversized aluminium door is required. Designed to work specifically with the CS carriage and track system and CaviLock hardware, the CS AluTec is clad in a 2mm thick aluminium skin which can be finished in a variety of colours. Internal polystyrene insulation is available for increased sound and thermal performance.

Specialised Options:

  • The AluTec is available for use with the SoundStop cavity slider for a sound rated solution. It has been tested to STC 36 and is suitable for single doors up to 2400 x 2200mm. GIB Noiseline 13mm linings must be used
  • A 75mm thick option is available for use with CS Pivot Systems
Key Features
  • Strong, rigid construction and premium flush finish
  • Very stable even under differential temperatures and changes of season
  • Pre-finished: manufactured in the factory to arrive on-site fully finished
  • Aluminium skin may be finished in a variety of colours
  • Ideal as oversized doors or large room dividers due to their stability
  • Available with quality, purpose made CaviLock handles and locks factory fitted
NZ Made
NZ Made
Scope of Use

CS Door Leaves are suitable for use in sliding, pivot or hinged applications in residential, commercial and light industrial buildings.

  • Ideal as oversized doors or large room dividers due to their stability
  • A variety of handles can be factory fitted including a custom designed recessed leading edge pull
Limitations on Use

Sizing (Sliding):

  • Doors may be any size up to up to 3.0 metres high and 4.5 metres wide. Doors over 1500 x 3000mm or 1200 x 5000mm require a 1mm vertical sheet join

Sizing (Hinged):

  • Door leaves may be any size up to 3.0m high and 1.2m wide
  • Higher and wider doors may be specified in consultation with CS For Doors.
In-Service History

CS Door Leaves have been successfully used in commercial and residential projects in New Zealand and Australia since 2001. 

Other Performance Attributes
  • CS Door Leaves are backed by a 5 year written guarantee
Data Sheet
Maintenance Instructions
Additional Information

CS For Doors are a manufacturer of cavity sliding door systems and related products.

Product Enquiries

News from CS For Doors

Barn Doors Create Feature Dividers in Kitchens
CS AutoCav: A Touch-Free Cavity Slider Solution
Bracing Cavity Slider Used for Bracing Wall in Renovation
Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.