You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

Pink Batts Ultra Wall Insulation - 140mm
Description

Pink Batts wall insulation is light-­weight, flexible, glass wool insulation designed to thermally insulate timber framed walls.  There are a number of products suitable for a range of standard wall constructions which can also be easily cut to fit in non-­standard constructions, including 'Narrow Wall' options. (See specifications below)

Key Features
  • BRANZ appraised, durable product for 50 years as required by the NZBC
  • Non-­combustible so will not melt or catch fire easily
  • R-­values up to R4.0, to help in keeping homes above World Health Organisation’s recommended 18°C

Specifications

Pink Batts Ultra Wall Insulation - 140mm is available as:

  • R3.2 140mm - 1140mm x 560mm, nominal stabilised thickness of 140mm
  • R3.6 140mm - 1140mm x 560mm, nominal stabilised thickness of 140mm
  • R4.0 140mm - 1140mm x 560mm, nominal stabilised thickness of 140mm
  • R3.2 140mm Narrow Wall - 1140mm x 380mm, nominal stabilised thickness of 140mm
  • R4.0 140mm Narrow Wall - 1140mm x 380mm, nominal stabilised thickness of 140mm
Categories / Ranges
Thermal Insulation Wall
Scope of Use

Pink Batts insulation has been appraised as a thermal insulation material for walls, ceilings, and roofs of buildings within the following scope:

  • framed or part-framed domestic and commercial buildings where the insulation remains dry during its serviceable life
Limitations on Use

Pink Batts insulation must be installed in accordance with the manufacturer's Technical Literature to meet the stated thermal performance rating of the insulation.

Statement of Building Code Compliance

In the opinion of BRANZ, Pink Batts insulation, if designed, used, installed and maintained in accordance with the statements and conditions of Appraisal No. 238 (2012), will meet or contribute to meeting the following provisions of the NZBC:

  • Clause B2 DURABILITY: Performance B2.3.1(a) not less than 50 years and B2.3.1(b) 15 years. Pink Batts insulation insulation will meet this requirement.
  • Clause E3 INTERNAL MOISTURE: Performance E3.3.1. Pink Batts insulation insulation will contribute to meeting this requirement.
  • Clause F2 HAZARDOUS BUILDING MATERIALS: Performance F2.3.1. Pink Batts insulation insulation meets this requirement and will not present a health hazard to people.
  • Clause H1 ENERGY EFFICIENCY: Performance H1.3.1(a) and H1.3.2 E. Pink Batts insulation will contribute to meeting these requirements.

Pink Batts has been appraised as an Acceptable Solution in terms of New Zealand Building Code Compliance. Pink Batts insulation thermal resistance (R-Value) has been determined by AS/NZS 4859.1 which is an acceptable method.

B2 Durability compliant
Durability
E3 Internal Moisture compliant
Internal Moisture
F2 Hazardous Building Materials compliant
Hazardous Building Materials
H1 Energy Efficiency compliant
Energy Efficiency
BRANZ Appraised
BRANZ Appraised
Literature
Product Assurance
Data Sheet
Environmental Product Declaration
Independent Appraisal (BRANZ)
PinkFit Pre-line Promise
Warranty
Other Literature
Product Guide

Provides home insulation products for energy efficient houses plus home improvement ideas, sound proofing material and home building insulation.

Product Enquiries

News from Pink Batts Insulation

Insulation for Energy-Efficient and Eco-Friendly Homes
EPD Certified Insulation: Specify Insulation with Confidence
Accurate Specification of Pink Batts ‘Narrow Wall’ Reduces Site Waste

Posts by Vanessa Lanegra

See All

Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.