You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

InteriorInterior
Thermakraft Thermathene Black 250μm
Description

Thermathene Black is a concrete underlay that is made from a tear and puncture resistant polyethylene film. It is commonly known as a Damp Proof Membrane (DPM). 

Key Features

Thermathene Black is intended for use as a dampproof membrane separating the concrete slab from ground soil. The product acts as a vapour barrier to stop ground moisture penetrating the concrete.

Thermathene Black is designed for use as a DPM under concrete slab on-ground floors complying with NZS 3604 or NZS 4229.

Thermathene Black Concrete Underlay is designed for use as a DPM on buildings subject to specific design within the following scope:

  • Where the DPM is laid on a granular base prepared to not damage the DPM; and,
  • Where the DPM is adequately protected against damage in service
Scope of Use

Thermathene Black intended for use as a damp-proof membrane separating concrete slab from ground soil. The product acts as a vapour barrier to stop ground moisture penetrating the concrete. Thermathene Black must be sealed with Thermakraft White General Purpose tape at the laps joints to form a complete vapour barrier

 

 

 

 

Statement of Building Code Compliance

Thermathene Black is an acceptable solution as per the requirements of the NZBC. Thermathene Black meets the requirements of NZBC 3604:2011 Clause 7.5.4.2, NZBC Acceptable Solutions E2/AS1, Table 23 and NZS 4229:2013 Clause 7.4 & 7.6. When Thermathene Black is used and installed as a damp-proof membrane as per Thermakraft’s literature, the product will meet or contribute to meeting the following provisions of the NZBC: Clause B2 Durability: Performance B2.3.1 (a), 50 years, Clause E2 External Moisture: Performance E2.3.3 & Clause F2 Hazardous Materials: Performance F2.3.1.

Documents
Data Sheet

Issue 6.0, April 2024

Quick Reference Guide

KINZ-QRGPR-WEBv1.0 May 23

Thermakraft on Masterspec
Installation and operation

Issue 2.0, September 2022

Kingspan Thermakraft Product Warranty Statement

Issue 7.0, April 2026

Kingspan are New Zealand’s leading provider of high-performance insulation products and complementary Thermakraft range of premium wall & roof underlay products, flashings tapes & underlay mesh.

Product Enquiries

News from Kingspan Thermakraft

FibroTech Acoustic Panels: Acoustic Performance is Now a Design Expectation NEW
Rigid Insulation, Mould Risk, and Wall Performance
Self-Adhesive Underlay Simplifies Rigid Air Barrier Installation for Fitzgerald Construction

Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.