You are using an outdated browser version not supported by this website.
Click here to upgrade your browser
5,472 products with technical literature, drawings and more from leading suppliers of NZ architectural materials.
Case studies, new products and product news from leading suppliers of NZ architectural materials.
Blogs for architectural specifiers, offering product, design and business advice.
The Australian made K-Roc Rockspan Wall Panel is a through-fix insulated wall panel with a non-combustible mineral wool (K-Roc) core.
Suitable for external wall applications where non-combustible construction is required.
Available in lengths between 2m and 11.8m depending on thickness. These panels have a 1100mm cover width. Suitable for horizontal or vertical installation.
Refer to the product data sheet for thermal performance values, fire classification and additional performance details.
Profile options:
Interior lining: Rib25, Flat
Exterior face: Mini Micro, Micro Rib, Flat
Mineral Wool core thickness options:
The panel may be used on the external walls of all types of buildings with specific detailing required when the panel is used as a Firewall (Ultima or Ultima Plus). The panel may be installed vertically or horizontally on walls.
When used as a Firewall, specific detailing, panel orientation and spans apply. Panel configuration is identified as either Rockspan Ultima or Rockspan Ultima Plus
Internal building environments exceeding ISO9223 classification C3 require specific steel coil selections. Refer to Kingspan for the appropriate material.
The panel is a cladding element only and doesn’t not provide additionalbracing capacity.
Direct fixing to concrete elements is problematic. Kingspan recommends timber or steel supports are connected to the concrete.
B1.3.1; B1.3.2; B1.3.3 (a, c, f, h, i); B1.3.4 – by testing and comparison with the provisions of Verification Method B1/VM1. Panel span tables are calculated on the requirements of BS EN 14059 “Self-supporting double skin metal faced insulated panels – Factory made products” which include the effects of live and permanent actions including temperature and long-term performance. Panel spans are calculated on a project basis using project specific loads
The panel has been tested for cyclonic regions to AS4040.3
B2.3.1(b) – by Coil manufacturer testing (Bluescope Steel) and comparison with the provisions of Verification Method B2/VM1, E2 AS1. Panel Durability is a function of the panels steel coil skins. Refer table 20 E2/AS1, coil coated steel, AM Coil Coated
C3 4(a) – by testing and comparison with the provisions of Verification Method C/VM2 and Acceptable solutions C/AS1 and C/AS2. The panel core has been tested to the fire requirements of AS1530.1 and is non-combustible. For internal Spread of Flame the panel achieves Group 1S based on testing to ISO9705
Ultima and Ultima Plus configurations are specific FRR walls
E2.3.2; E2.3.7 – by testing to AS/NZS 4284. The panel has a factory applied weather seal in the external joint and a site applied seal in the internal panel joint.
E3.3.5- by comparison with Acceptable solution E3/AS1
F2.3.1 – by testing and comparison with the performance requirements of F2.3.1
H1.3.1 – by testing and comparison with Verification Methods H1/VM1 and H1/VM2. The panel has been evaluated to the requirements of AS/NZS 4859-1 with 3rd party professional opinion provided by James Fricker
Kingspaninsulated panels have been in use globally for over 50 years and Kingspan has supplied panels for use in NZ for over 20 years.
Kingspan products and systems are backed by testing and guarantees.
Kingspan Insulated Panels specialise in the design and manufacture of high quality, firesafe, insulated roof, wall and façade systems.
Product EnquiriesNew and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.
