• Vauth-Sagel kitchen storage pull outs are suitable for residential use throughout the home; kitchens, pantries, sculleries. They also have applications in laundries, home offices, and garages.
• Designed for base cabinet installations in new custom joinery or retrofitting into existing cabinets — can be installed into existing base cabinetry without requiring benchtop removal.
• Fits cabinet widths of 150mm, 200mm, or 300mm, with a minimum required cabinet depth of 465mm and a minimum internal cabinet height of 515mm. 
• Fully compatible with VS ADD Box and VS ADD Separator storage inserts.

• Load capacities must not exceed 12kg for 150mm and 200mm cabinet models, or 20kg for the 300mm cabinet model.
• Not suitable for base cabinets with an internal depth of less than 465mm or an internal height under 515mm

Suitable for residential use, taking into account the following:

• Recommended maximum cabinet widths, depths and heights.
• Be familiar with the load capacity of the unit and do not exceed it.
• To avoid base panel sagging, sufficient support for the cabinet base is required directly under the mechanism runner. Warranty depends on adequate support being installed with the pantry.
• To avoid base panel sagging, sufficient support for the cabinet base is required directly under the mechanism runner. Warranty depends on adequate support being installed with the pantry.
• When opening and closing unit or when putting items into it, do not apply strong downward force as this may damage the runners.
• Do not use caustic cleaners on any part of the unit. Some dishwasher powders and laundry powders are particularly caustic, as are dry salt, salt water and any citrus juice. If they spill onto or into the unit, remove the powder promptly with a vacuum cleaner, soft brush or damp cloth taking care to re-wipe the surface clean after rinsing cloth free of substance and ensure it is dried well.

Refer to the Care & Maintenance document for further detail.

FIT first brought Vauth-Sagel kitchen storage units to the New Zealand market in 2013. Since then, they have refreshed models and styles on occasion, with the latest style, ESSENTIO® launching in 2026. The VS SUB® Rack model was launched in 2026.

• Load capacity: 12kg for 150mm/200mm cabinet units and 20kg for 300mm cabinet unit

Warranty

FIT warrants the original purchaser of products against manufacturing defects for as long as the original purchaser owns the product. This warranty applies to all non-electrical products sold by FIT in New Zealand and Australia.

The warranty covers replacements for faulty goods only. Replacements will be supplied to the original purchaser only. If the identical item is no longer available, FIT will replace with the closest item from their current product selection. The warranty does not include any labour or other associated expense that may be involved in removal or installation of the product. The warranty does not apply if products have been incorrectly installed, have been subjected to loads in excess of specifications and/or have been subjected to uses/purposes for which they are not expressly intended. FIT’s liability is limited to the goods themselves and does not cover any consequential or incidental damages contributed to or resulting from the use, installation, performance or failure of products.

In New Zealand this warranty is additional to the conditions and guarantees of the Consumers Guarantee Act (1993).