Equus Traxx is suitable for a range of substrates (with the correct primer), including concrete, plaster, tile, timber, and steel. Generally it is used over new or existing concrete flooring in a variety of commercial areas as a heavy duty, chemical resistant interior finish. Suitable for use in Clean Rooms as it holds the ISO 14644 Clean Room standard approval.

Traxx can be used in areas subjected to traffic or where non-slip characteristics are essential, and/or where protection of the substrate from aggressive agents is required. Traxx smooth and non-skid can be applied to vertical surfaces. 

For a heavier duty finish Traxx SL (Self-Leveling) is also available

Equus Traxx Flooring System must be used in accordance with the correct specifications and substrates mentioned in this TDS, or in other Equus approved technical documentation. Not suitable as a heavy-duty floor finish.

Not suitable for exterior conditions or in areas of with UV exposure except where specifically approved by Equus Industries.

• B2 Durability - B2.3.1(c) Equus Traxx Flooring System has a durability of at least 5 years when installed with the correct specification, installation and maintenance.
• D1 Access Routes - D1.3.3(d) Equus Traxx Flooring System complies with D1/AS1 on level surfaces, and on sloping surfaces and stairs with the use of Equus Traxx NS (non-skid)
• F2 Hazardous building materials - F2.3.1 Equus Traxx Flooring System is a waterborne material and contains no mammalian-toxic substances. Refer to product SDS’s at www.equus.nz 

40+ years in service history in New Zealand