Dulux Wash & Wear 101 Matt is highly recommended for all interior walls where minimal light reflection is desired.

Suitable for use on properly prepared & primed/undercoated paper faced wallboard (Gib® Board), cement, brick, interior timber, set plaster, fibrous plaster, plaster glass, and previously painted surfaces. 

• The Painting of Buildings : Do not use at temperatures below 10ºC or when the temperature of surface may fall below 10ºC during the drying period. Avoid exposure to steam and condensation for 48 hours after application. Although the film is dry to touch in 30 minutes, allow 7 days for film to fully cure before washing.
• Darker Colours : Will show more signs of marking and scuffing than lighter colours. If you are considering using a dark colour in a high traffic area we recommend a higher sheen level or use of a protective clear coat.
• Tinted Colours :  Ensure the paint is thoroughly shaken and stirred immediately after addition of tinter to the can and again before use.

• Mould & mildew resistant technology
• Low odour & very low VOC (<5g/L)
• Eco Choice Aotearoa