• New construction, refurbishment work, apartments, cinemas, theatres, sports complexes, night clubs, bars, restaurants, hotels, shopping centres
• Residential or commercial buildings where liquids are moved via pipes through walls or floor/ceiling voids

• For interior use only.
• Operating Service Temperature: -10 up to 60°C.
• Shall not commence until the building is water tight and dry. Application temperature shall be between 5—35°C
• Prior to installation, contact adhesive must be applied to both the substrate and the Tecsound FT
• Leave to dry per adhesive manufactures instructions before bonding the two surfaces
• Pressure must be applied on all areas to ensure correct adherence
• Where large areas are covered, overlap 5cm both lengthwise and crosswise
• If the membrane cannot be overlapped, use the self-adhesive S50 Band 50 to seal butt joints

NZ Building Act

• This product is not subject to a warning or ban under Section 26.

• NZ Building Code Compliance:

• B2 Durability – Clause B2.3.1 (b) (i): Soprema Tecsound FT will have a minimum durability of at least 15 years when installed in accordance with manufacturer’s installation requirements.
• C3 Fire – Clause C/AS2 4.12.1: Soprema Tecsound FT is to be tested. Due to its similarity to Tecsound SY, is likely to have a Fire Material Group Number 1-S (B-s1/s2), no greater than 2-S, by NZBC Building Product Specification Parts 8.5.3.1a), based on classification from BS EN 13501-1:2018.

Soprema LLC, for more than 100 years, is an international company specialising in developing high end sound proofing solutions and products for the building industry.

• Acoustic insulation: Insertion loss of airborne noise ( ILa,A): 13 dB