• Polyfon Pinboard is designed for use in general office and the education environment where a tackable wall surface is required.
• Suitable for notice boards, meeting rooms, training rooms, classrooms and corridors.
• A variety of woven and non woven fabric finishes are available. Please contact Asona for full range.

• For interior use only, and not in direct contact with water.
• Maximum humidity/temperature 95% R/H at 30°C.
• Shall not commence until the building is water tight and dry. Panels shall be glue fixed to wall lining or glued and pinned to timber framing at 300 mm centres. Care shall be taken when handling to avoid damage. Store panels on pallets in a clean dry place.

• B2 Durability – Clause B2.3.1 (c) (i): Asona Polyfon Pinboard with only normal maintenance will have a minimum durability of at least 5 years when installed in accordance with; manufacturer’s installation requirements.
• C3 Fire – Clause C/AS2 4.12.1: Asona Polyfon Pinboard with polyester fabric has a Fire Material Group Number 1-S by NZBC Building Product Specification Parts 8.5.4 or 8.5.5, tested in accordance with ISO 9705 or ISO 5660. Other fabrics 2-S, 2 and 3. Please consult Asona.

This product is not subject to a warning or ban under Section 26.

• Global GreenTag Level B
• Low VOC material