• Recommended for use as internal partition framing, infill framing, and bulkheads in interior commercial refits, office refurbishments, and residential fit-outs.
• Suitable for framing uneven, non-level, or challenging internal geometry, including raked ceilings and leveling up soffit panels.
• Suitable for installation in tight or restricted multi-storey work spaces where traditional rigid framing is difficult to transport via elevators or narrow stairwells.
• Available in 3 x 3 kitsets or supplied to designs
• Profiles match lining board standards for interior drywall, acoustic lining, or decorative wall panel applications.

• Not suitable for exterior structural framing, external load-bearing walls, or exposure to open weather elements.
• Fire-resistance ratings of the completed partition walls must be verified and specified separately by the selected lining board manufacturer.
• On-site connection specifications and screw coatings must be selected based on specific internal moisture conditions (e.g., zinc-plated fasteners are recommended for standard New Zealand internal climates).

SPEEDFLOOR Telescopic Panels, if designed, used, installed, and maintained in accordance with the manufacturer's technical documentation, will comply with, or contribute to compliance with, the following performance provisions of the NZ Building Code:

• B1 Structure: B1.3.1, B1.3.2, B1.3.3(a, b, f, h, j, l, m, p)
  The panels are engineered in accordance with cold-formed steel structure standards (AS/NZS 4600) and continuous hot-dip metallic coated steel requirements (AS 1397) to withstand structural actions, internal wind pressures, and seismic movements within New Zealand buildings.
• B2 Durability: B2.3.1(b)
  Manufactured using high-tensile galvanised steel to provide corrosion resistance and maintain a durability lifespan of not less than 15 years when installed in dry, internal environments.
• F2 Hazardous Building Materials: F2.3.1
  Light-gauge steel profiles do not emit harmful gases or airborne particles, making the system completely safe for indoor air quality and general building occupancy.

Telescopic Panels are manufactured in New Zealand using automated global roll-forming technology. They are routinely used across domestic commercial refurbishments and interior fit-outs where quick structural adjustment is necessary.

• Steel Material Strength: Manufactured using steel with a certified yield and tensile strength of 550MPa.
• Corrosion Resistance Coating: Hot-dipped galvanised zinc coating delivers atmospheric protection inside standard building enclosures.
• Manufacturing Standards: Produced under an ISO 9001 Quality Management System.