Mains Pressure Vitreous Enamel Electric Hot Water Cylinders by Rheem

Mains Pressure Vitreous Enamel Electric Hot Water Cylinders

Description

Vitreous Enamel lined hot water cylinders provide greater corrosion resistance to a wide range of water conditions including varying pH levels, high chlorides, hard water and MIC (Microbiological Induced Corrosion) as found in parts of New Zealand or in areas with untreated bore water. Models range from 25 litre to 300 litre capacity.

Key Features

Abundant hot water suitable for all water pressures
Galvanised steel exterior
Inner steel cylinder coated with vitreous enamel to suit a wide range of water conditions
Fitted with a sacrificial zinc/magnesium anode to provide additional corrosion protection to the cylinder in adverse water conditions
Solstice Green insulation helps maintain the optimum water temperature, reducing energy use and providing economic and environmental benefits
Designed and manufactured in New Zealand
Twin and dual element models available
10 year domestic residential cylinder warranty

Available in the following model configurations:

MPVE 31202519V | 25L | 398 x 400mm | 2.0kW
MPVE 31204513 | 45L | 525 x 490mm | 2.0kW
MPVE 31204515 | 45L | 525 x 490mm | 3.0kW
MPVE 31209013 | 90L | 925 x 490mm | 2.0kW
MPVE 31209015 | 90L | 925 x 490mm | 3.0kW
MPVE 31213513 | 135L | 1325 x 490mm | 2.0kW
MPVE 31213515 | 135L | 1325 x 490mm | 3.0kW
MPVE 32213515 | 135L | 935 x 580mm | 3.0kW
MPVE 31218013 | 180L | 1710 x 490mm | 2.0kW
MPVE 31218015 | 180L | 1710 x 490mm | 3.0kW
MPVE 32218015 | 180L | 1165 x 580mm | 3.0kW
MPVE 31218025 | 180L | 1710 x 490mm | 2 x 3.0kW non-simultaneous
MPVE 31225015 | 250L | 1555 x 580mm | 3.0 kW
MPVE 31225025 | 250L | 1555 x 580mm | 2 x 3.0 kW non-simultaneous
MPVE 31230015 | 300L | 1815 x 580mm | 3.0 kW
MPVE 31230033 | 300L | 1815 x 580mm | 2 x 3.0 kW simultaneous
MPVE 31230055 | 300L | 1815 x 580mm | 2 x 5.0 kW simultaneous

Ranges

Hot Water Heating for the Home Domestic Electric Water Heaters

NZ Made

Scope of Use

Residential hot water cylinder
Indoor installation
135 litre model is suitable for 1-2 people in moderate climates
300 litre model is suitable for 3-5 people in moderate climates
Suitable for mains pressure, unequal pressure and low pressure use
Suitable for a wide range of water conditions including hard water, bore water and high chloride