Resene X-300E by Resene

Resene X-300E

Description

Resene X-300E is a thixotropic weathertight membrane designed for thick application over concrete surfaces. The coating, when specified at the correct dry film thickness, has unique crack bridging properties and any movement of cracks beneath the coating layer does not result in film fracture.

Key Features

Protects flexing structures from concrete carbonisation by maintaining a seal over the micro cracks that develop
Improved dirt pick up and crack bridging properties
Formulated for airless spray application.
An Ecol Choice approved product.
Colours: White and colours off white.
Gloss level: Semi gloss

Scope of Use

Ideally suited for structures that will flex and develop minor cracks.

Typical uses: Concrete road bridges, high rise concrete buildings, all other cementitious surfaces.

Due to its unique rheology, Resene X-300E may be applied at very high thicknesses without sagging or film cracking. Where possible, film thickness should be achieved with one coat for optimum film formation.

Limitations on Use

Due to regional variations in concrete block standards, two coats may be insufficient to produce a weathertight membrane. Weathertightness can only be assured when all voids are filled, therefore three coats over block is a safer specification.
Brush or roller application is preferred over block and essential for at least the first coat.
A minimum dry film thickness of 180 microns is required to achieve weathertightness in accordance with CCANZ CP01 2014.