Resene Vinyl Etch by Resene

Resene Vinyl Etch

Description

Resene Vinyl Etch Primer combines all the versatility of the normal two pack product with the convenience of a stable single pack. The fast drying time, adhesion, abrasion resistance, and overcoatability features have all been maintained in this highly effective chromate free primer / pretreatment.

Key Features

Colour: Red oxide, grey, black
Very rapid dry and overcoating times
Unsurpassed adhesion over a variety of metal surfaces
Useful over several plastics and laminated surfaces
Compatible with most topcoats making it a very useful blast primer

Scope of Use

Suitable as a pre-treatment, blast primer, or holding primer on:

Aluminium metal spray
Aluminium sheet and extrusions
Copper and its alloys
Galvanised steel
Old varnished surfaces
Smooth cementitious surfaces
Steel pipes
Steel plate
Structural steel
Zinc metal spray

Limitations on Use

Resene Vinyl Etch is not designed to give long-term exterior protection without overcoating. When used in a severe marine environment it should be overcoated within a week. Durability of up to three months can be expected in mild marine conditions or better. With reasonable storage conditions coated articles will be protected for over a year. A film thickness of 20 microns is recommended with a period of exterior exposure is envisaged.
Drying times of solventborne paints may be extended when applied directly over Resene Vinyl Etch.
Not suitable for direct overcoating with Resene Imperite I.F. 500 Series (see Data Sheet RA81 and Data Sheet RA82) topcoats.

Documents

Data Sheet

URL