Resene Concrete Wax is a tough, waterborne satin glaze for use on concrete floors and benchtops. Scratches can be easily repaired with a light sand, feathering of the edges and overcoating to keep the surface in good condition.
Do not apply at temperatures below 10°C or when it is liable to drop below 10°C during the drying period.
When sanding is required use fine wet and dry sandpaper with water.
Not recommended for exterior use.
Will not penetrate or reinforce weak surfaces.
Designed for horizontal surfaces, not vertical or inverted surfaces.
Areas coated with this product unmodified may not comply with New Zealand Building Code D1 3.3(d). Refer also to New Zealand Building Code D1 2.0 table 2.
To achieve maximum coating life remove shoes with spiked or damaging heels before walking on a floor coated with Resene Concrete Wax.
Not recommended for use on surfaces subject to vehicular traffic, e.g. garage floors or similar.
Consult the current Data Sheet and Safety Data Sheet prior to specification or application of product.
Resene decorative coatings are tinted using unique Resene non-VOC tinters to achieve the desired colour without added VOCs. Engineered Systems Coatings products are tinted using special Resene industrial tinters.
Resene can create a customised specification free for any project – contact them for more information. Order colour charts and drawdowns of Resene colours here.