Resene Concrete Clear by Resene

Resene Concrete Clear

Description

Resene Concrete Clear is a tough waterborne glaze for use on masonry and brick surfaces to enhance its colour and natural beauty. It also increases the durability of high build waterborne specialist coatings. Resene Concrete Clear can also be used over solid colour or metallic decorative paint finishes.

Key Features

Excellent intercoat and substrate adhesion.
Non-yellowing.
Excellent protection of brick and fibre cement.
Resistant to chipping and peeling.
Resistant to oil and fat splashes.
Resistant to alkaline cleansers.
Resene Concrete Clear can also be used over solid colour or metallic decorative paint finishes.

Scope of Use

Brickwork/artificial brickwork, fibre cement, high build acrylics, masonry surfaces and plaster.

Limitations on Use

Do not apply at temperatures below 10°C or when it is liable to drop below 10°C during the drying period.
Where weathertight problems are encountered, a pigmented high build system, such as Resene X-200 (see Data Sheet D62) should be used.
When sanding is required use fine wet and dry sandpaper with water.
Not recommended for exterior tile or decorative aggregate flooring where water ponding may occur.
Not recommended for use as a varnish on exterior timber or large areas of interior timber.
Will not penetrate or reinforce weak surfaces.
Not recommended directly over pre-primed and factory sealed substrates. Consult with a Resene representative for an effective system.
Many factory primers do not have good U.V. stability and will breakdown underneath clear coatings. Over a UV-sensitive primer a pigmented topcoat is required to ensure long term durability.