You are using an outdated browser version not supported by this website.
Click here to upgrade your browser
Dezignatek Acrylic is a high gloss laminate that underlines the latest trends in kitchen design. The seamless connection of board and edging produces a perfect component with an all-round gloss finish.
Dezignatek Acrylic is a multi layer co-extruded polymer laminate produced from a styrene copolymer underlayer and an acrylate top layer. Due to the 0.7 - 0.8mm thick material combination, Dezignatek Acrylic achieves a high tension force that has a positive effect on the surface smoothness and in combination with MDF creates a mirror gloss surface.
The high-gloss laminate has enhanced scratch resistance, making it a great choice for interior applications. The balancing sheet developed by Rehau is perfectly colour co-orindated to Dezignatek Acrylic, is scratch resistant and has sufficient freedom from distortion for the pressed board.
If doors are subjected to excessive heat from certain types of ovens and dishwashers on a prolonged basis, shrinkage of the edges may occur. To eliminate this potential shrinkage Dezignatek recommends as follows:
Never use the following on your doors: abrasive cleaners, Janola or similar, scourer pads, wire wool, sand paper, or solvents and thinners.
While Dezignatek doors and panels are water resistant, they aren’t water proof. Care should be taken to ensure that they don’t have exessive exposure to water, steam or extreme humidity.
Dezignatek combines the experience and skills of a number of leading experts from the New Zealand kitchen and joinery industry.
New Zealand Panels Group, offer a wide collection of decorative interior panels and benchtop surfaces through its Prime Panels and Bestwood brands, and thermoform and laser finishing under DezignatekProduct Enquiries