• Corner Moulds Provide window and door sill corners with flashing protection.
• Use with Thermakraft window flashing tapes.
• When applying Aluband (bituminous) Window Flashing Tape, Corner Moulds must be used.
• When applying Thermaflash (synthetic) flashing tape Corner Moulds are recommended but optional. Refer to window flashing tape installation guide for more details.

• Must NOT be used in other construction applications apart from window and door penetrations whereby a flexible window flashing tape is required.
• Corner Moulds will only suit rectangular/square shaped window and door penetrations.

When used with Thermakraft window flashing tapes, the Corner Mould product will meet or contributing in meeting the NZBC in the same scope as the Thermakraft window flashing tape.

• Refer to the Thermakraft window flashing tape technical specifications sheet for more details on compliance.
• Refer to Thermakraft window flashing tape installation guide for installation details.