Triton Fabwall Bass™ low frequency absorber panels are designed for sound studios, music rooms and large volume spaces where reverberation times below 250 Hz must be controlled.

• For interior use only, and not in direct contact with water
• Maximum humidity/temperature 90% R/H at 30°C
• Panels with digital printed fabric must not butt together due to image creep formed during the printing process. If large panel images are required then use Snaptex stretch fabric system with wide format fabric.

NZ Building Act

• This product is not subject to a warning or ban under Section 26.

NZ Building Code Compliance:

• B2 Durability – Clause B2.3.1 (c) (i): Asona Triton Fabwall Bass with only normal maintenance will have a minimum durability of at least 5 years when installed in accordance with manufacturer’s installation requirements.
• C3 Fire – Clause C/AS2 3.4(a): Asona Triton Fabwall Bass with polyester fabric or Sonatex™ have a Fire Material Group Number 1-S by NZBC Building Product Specification Parts 8.5.4 or 8.5.5, tested in accordance with ISO 9705 or ISO 5660.
• (NCC BCA C1.10 clause 4, spec A2.4 clause 4. Group 1).
• Other fabrics 2-S, 2 and 3. Please consult Asona.

• Low VOC
• GreenTag certified / Level A