While working through a set of plans for a new apartment complex recently, we were asked to specify a system for all external joinery that involved the use of PVF2 technology due to the location of these apartments by the sea.

Have you been required to provide the SFI (Spread of Flame Index) and SDI (Smoke Development Index) information of the specified coatings for a project recently?

With increased pressure on our environment there is a growing requirement for manufacturers like us to understand the impact our products have on the environment and how these impacts can be minimised. 

The chance of surfactant leaching occurring, as explained in my last post, can be greatly reduced by following the outlined simple, easy steps...

We are sometimes approached by architects and painters who observe a phenomenon called 'surfactant leaching'.  

If you have ever pondered what efflorescence is and how it affects the specification of a concrete, particularly for underground areas I am here to answer your questions.

Ah, the age old question.  Hopefully this post will give you some insights as to why this happens.

Recently I received a panicky phone-call from a friend. 

Recently we were asked to assist with the preparation of a paint specification for a Green Star building and the project team wanted to ensure that we gained the maximum points on offer under IEQ3 and Matt3 in relation to paint and coatings.

A Dulux AcraTex Texture System is permanent. Like all surfaces exposed to the elements, preventative maintenance will keep it looking its best and preserve its optimum performance over a longer time span versus a cement render painted finish.